to ferreira

Hello everybody

this is to bag your help to solve a problem I`m facing.

I make a deal with someone about a LINK ECU, second hand, but never used(seller said).

now, after fitting and connecting the tunning module, the ECU remains locked; this is, the code in the monitor is " XXX".

according the book manual, must appear a three digit number to be changed in accordance with the original code to unlock the unit.

are there anyone with knowledgment to help me?

thanks in advance

best regards

to ferreira

AlanG

Hi
Would it not be best to contact the vendor of the ECU to gain the unlock code?

A

[This message has been edited by AlanG (edited 16 June 2001).]

Sam Elassar

hi
apparently i shouldn't have put that on the net. oops

if you have XXX it is not locked D'oh

[This message has been edited by Sam Elassar (edited 16 June 2001).]

to ferreira

Hi

there are two problems:
1- the code in the monitor is "XXX".accorging manual should be a three digit number.does it mean that the ECU is blocked?
2- starting with that code ( three capital letter X)I can not adjust the code.simply, the adjust buttons don not work ( they work with all other functions).

regards

to ferreira

R19KET

From memory, the tuning module always shows "XXX". Try ignoring it, and see what happens........

Mark.

to ferreira

Hi guys

problem solved.

in fact, the code "XXX" means unlocked.
(the manual was downloaded from MRT site and is not updated).
I edited the zone 6 and found the correct code.

thanks and regards

to ferreira


[This message has been edited by to ferreira (edited 16 June 2001).]