I am getting my roof resprayed and with this both screens need to come out. Being highly likely the front will break I am opting for a heated one to be installed.
Being £20 difference between clear and green I think green would be better.
I can't help but wonder if a green tint & thin wires through it may make it to dark over the clear.

Anyone got a car with a heated screen? What colour is the glass?

Oh and can anyone confirm if my parts list is correct.
Respray Roof what's needed. - ScoobyNet.com - Subaru Enthusiast Forum

 

Of course the correct way of doing it is to remove the screens but success can be had by pushing a plastic coated wire under the seal to lift the rubber enough to get good coverage, at least it did 20 odd years ago when i was in the body work industry.

By the way i would replace like for like when it comes to glass. Top tints to me screams Sharon loves Kevin like back in the 80,s

 

I did wonder if the seal could just be lifted to save money but I'd rather do it the correct way.

There are several stone chips close to the edges and I think I'd rather the painter remove it.

My screen already has a decent chip on the passenger side and I like the benefit of an after market heated one.

A jdm oem one is silly expensive and I don't think the heated have a black, green or brown bar along the top but the whole thing has a light tint. Or none as the cheaper option.

 

where are you getting the heated screen from as I will also need one very soon

 

https://www.heatedwindscreen.com/aca...indscreen.html


They currently have 2 in stock so please don't steal mine.

 

ill hang fire till you say you have your one then buddy ,, thanks for the info

 

Ordered