stockcar

seems I don't have the details stored as thought as can't seem to find the correct numbers required.......

later widetrack new-age car uses 20311FE810 LH and 20311FE800 RH so was looking for compatible KYB's??

Chrisp11981

iTrader: (1)

If it's the fronts you're after KYB don't do them for the widetrack.

stockcar

seem to recall they potentially did at one point but maybe only in Excel-G ??

Don Clark

From 2020 KAPcatalogue

Chrisp11981

iTrader: (1)

I never had any joy for the fronts, I got some ultra SR for the rear as they are the same from the 5x100 newage, just a different top mount iirc. Luckily I managed to get a front set of the rb320 ones to replace mine. I believe 2pot on here is working on inserts for widetracks.

2pot

iTrader: (3)

Sadly, not for the 114.3mm fronts.

I got so fed up, I decided to make STI-rated inserts, front and rear, to fit the inverted 5x100 and 5x114.3 Subaru/KYB housings.
Bilstein are currently making version 3 for testing.

You can fit the insert into non-inverted housings, with an adaptor (currently running like that). The id's/lengths are different between non-inverted strut manufacturers. That requires differing length/diameter weld-in adapters to do it - might be something you could take on? The KYB non-inverted strut housings are consistent.

The Subaru/KYB inverted strut housing also take some preparation:
Internally tap the top of the housing.
Drill out the hole in the base of the strut housing.
Remove the internal bearings.

Chrisp11981

iTrader: (1)

Pedders do some struts that fit the widetrack but I believe there are differing opinions on the quality.

https://pedders.co.uk/amfinder?find=...ti-sedan-37508

Chris.