Hello ScoobyNet,
I need your help!

I'm looking for the part number of the camshaft outer seal (you can see the number (3) circled in the bottom right of the illustration):



When I scrolled down to look for it, the part number was no where to be found:



Does anyone have the part number for these?


Thanks,
ET

 

Using the above diagram for reference the part number is 13583AA290

 

As I read it, item 3 is a normal oil seal. When I built my engine, it came as part of the engine gasket set. I would think its available separately from Subaru agents.
Can't help with the part No though, sorry.

 

Unfortunately you've read it wrong.

Camshaft seals, rather than as the thread heading "Belt cover cam seals" are shown in the camshaft section as per below

 

Yes, I remember now.
Thanks Don

 

It would be nice if anyone could find the part number for a longer roll of this foam seal. I just bought a new RH inner cam belt cover and it came without any seal installed. I just installed some universal weather seal foam tape but I'm not sure it was the best for this application.

The LH seals won't be long enough.

 

The other three parts of the seal are
13583AA260; 13583AA270; and 13583AA280




You may be able to cut your own from one of these

https://www.carbuilder.com/uk/19-x-3...trip-per-metre
https://www.carbuilder.com/uk/25-x-6...trip-per-metre
https://www.carbuilder.com/uk/25-x-1...trip-per-metre

 

Thanks for those part numbers. Yes I used something similar but grey and a bit thicker. I'm not sure if the Subaru foam is any better. I don't really like the idea of having that kind of foam near hot engine parts, if the foam becomes soaked with oil.

 

Thanks Don! You are the best!
I think what I was after were the cam seals after all (806732160)... Diagram got me confused...


Thank you!