Aluminium power steering tank
26 October 2019, 02:08 PM
#1
Scooby Regular
Thread Starter
Aluminium power steering tank
I want to replace my power steering tank because it lets the rest of the engine bay down. Just came across this. https://www.mishimoto.co.uk/aluminiu...xoC_9AQAvD_BwE
Does any one know if this will fit or of an alternative?
Thanks jon
Does any one know if this will fit or of an alternative?
Thanks jon
27 October 2019, 10:06 PM
#3
Scooby Regular
Thread Starter
28 October 2019, 07:06 AM
#4
You would need to check the outlets on your ps bottle
http://opposedforces.com/parts/impre...llustration_4/
There was a revision on 06/07 which has the pipe not going straight down but the actual bottles are the same with same fitment
http://opposedforces.com/parts/impre...llustration_4/
There was a revision on 06/07 which has the pipe not going straight down but the actual bottles are the same with same fitment
28 October 2019, 08:52 PM
#5
Scooby Regular
Thread Starter
Had a look at my tank today and both of the pipes come out the side. Going to order one of those tanks anyway and see if i can adapt it to fit. Shouldn't be a problem
29 October 2019, 11:05 AM
#6
Looking at the schematics they dont list a different hose (number 17 on diagram) to go with later bottle so finger crossed you'll be grand - worst case scenario you'll need an extra bit of rubber hose
http://opposedforces.com/parts/impre...llustration_4/
http://opposedforces.com/parts/impre...llustration_4/
Thread
Thread Starter
Forum
Replies
Last Post