question about exhaust sections
#1
Scooby Regular
Thread Starter
question about exhaust sections
my blob wrx has the following
back box
centre section
downpipe
now my DP to centre section doesnt have a flange fitting, its a slot in type, the DP does have a piece of pipe welded on to it to allow the centre section to fit into it, ive been looking at centre sections and they all seen to have a flange fitting, so im guessing the previous owner cut off (for some reason) the DP flange?
back box
centre section
downpipe
now my DP to centre section doesnt have a flange fitting, its a slot in type, the DP does have a piece of pipe welded on to it to allow the centre section to fit into it, ive been looking at centre sections and they all seen to have a flange fitting, so im guessing the previous owner cut off (for some reason) the DP flange?
#2
Scooby Regular
iTrader: (7)
Join Date: Apr 2007
Location: on the computer.... obviously!
Posts: 545
Likes: 0
Received 0 Likes
on
0 Posts
Probably A downpipe from a classic mated to a new age centre section. The length is different so it would have required the modification.
To fit a different centre section you will either need to get another downpipe or get a flange welded onto your current one.
To fit a different centre section you will either need to get another downpipe or get a flange welded onto your current one.