Cleaning IACV
#1
Scooby Regular
Thread Starter
Join Date: Mar 2016
Location: Hampshire
Posts: 280
Likes: 0
Received 0 Likes
on
0 Posts
Cleaning IACV
I've been reading this guide to clean the IACV:
https://forums.nasioc.com/forums/sho...d.php?t=781242
Could I just use WD-40 or would I need carb cleaner etc as well?
https://forums.nasioc.com/forums/sho...d.php?t=781242
Could I just use WD-40 or would I need carb cleaner etc as well?
#3
Scooby Regular
Join Date: Jun 2016
Location: Yorkshire
Posts: 198
Likes: 0
Received 0 Likes
on
0 Posts
The above link only does half a job, you want to dissasemble the unit to clean properly.
I first tried the above with no success...
Try this way
https://www.google.co.uk/url?sa=t&rc...MtX98PjDeuiaHQ
If you do split, make sure not to get too much cleaning fluid (petrol / carb cleaner ) etc in the bearing, for obvious reasons.
Also mark the position of the 2 screws holding the unit together. this isnt essential as can be adjusted when car is running.
Good time also to clean TB out and do coolant bypass mod.
I first tried the above with no success...
Try this way
https://www.google.co.uk/url?sa=t&rc...MtX98PjDeuiaHQ
If you do split, make sure not to get too much cleaning fluid (petrol / carb cleaner ) etc in the bearing, for obvious reasons.
Also mark the position of the 2 screws holding the unit together. this isnt essential as can be adjusted when car is running.
Good time also to clean TB out and do coolant bypass mod.