Guesty

Well chaps as im wanting to remove the front plate and move to a sticker on bumper i was not willing to pay £££ for a sign to cover the holes in the bumper

I decided to make one i grab a few aluminium push plates from work
Soo i measured the size needed to sit just inside the part on the bumper it needs to be 300mm x 40mm



New push plate 300mm x 75mm



Marked out ready for cutting 40mm



40mm plate marked out



Cut out and sanded ready for paint

After cutting out i got some new sand paper and rubbed all edges to make the smooth just need priming and painting with a sticker will post photos when finished

domino46

Done my Perrin one the same way

Guesty

I need a perrin sticker to put on and paint then remove but cant find one lol

CharlySkunkWeed

iTrader: (7)

Google images , print , trace it , convert onto masking tape and cut round it. Basically will have made your own sticker.

Might make my own someday if I can be bothere'd. Love making things like that

Guesty

Im guna print one today and try it

Should i screw in to car or 3m it

domino46

I used the original mounts but got some counter sunk bolts and some red washer to finish it off , got them from my mate as he had them left over , there similar the rally tech bolt kits but not sure if it's there's but shouldn't be hard to find on ebay

Could do with redoing this year I think lol

CharlySkunkWeed

iTrader: (7)

Think this is going to be my next project.

Guesty

I do like the spacers and the bolts i need to drill out my screws as somone must of glued the plastic reg screws in and they snapped takin the reg off so im driving with no front reg now till my sticker one arrives

CharlySkunkWeed

iTrader: (7)

........officer

Guesty

I found them
https://www.ebay.co.uk/itm/272370079428

Guesty

All finished ready for fitting just going to though a few coats of clear coat over it tomorrow

CharlySkunkWeed

iTrader: (7)

Nice one

Guesty

Plate fitted just waiting for screws amd washers was given 3 clear coat last night also fotted the sticker plate but i must admit i dont like the plate looks odd

CharlySkunkWeed

iTrader: (7)

Sticker plate looks keek. Blank looks great , def on my "to do" list.

Guesty

Whats keek mean pal amd il cut one down to size and post out of you want pal then u just need to do holes and paint

CharlySkunkWeed

iTrader: (7)

Means rubbish looking

Aye a plate would be handy , I think I'd just use mine for shows/meets and have the reg on when driving. Though I've a "scooby" reg so no point in hiding it !

Guesty

Ahhh yeah im not too keen onit looks odd think i might have to get a square one and make a relocation bracket with the tow eye

domino46

For all the effort you may as well just buy a cheap one

http://www.ebay.com/itm/1320-Dual-Fr...lXjL6w&vxp=mtr

Guesty

Not too bad ive tried seeing yesterday where my front eye is on my car but i cnt see the clip in the bumper that you pop out :/

domino46

It's behind the fog covers beside the fog light , I cut a hole in my cover to allow it to be fitted with the relocation kit

Guesty

Ahhh thats why i couldnt see it lolil have to do some digging