Forgive me father for I have sinned!!
#1
Scooby Regular
Thread Starter
Join Date: Oct 2016
Location: Killin
Posts: 943
Likes: 0
Received 0 Likes
on
0 Posts
Forgive me father for I have sinned!!
Please forgive me everyone......
In a moment of madness I went all chavtastic and stuck a VTA BOV on the Scooby
I know i know......in my defence though I went with the Forge BOV as it's a bit subtle below 3k and only really makes a fast and furious ppppssshhhhhh (or however the **** you write it) noise above 3-4K but I'm fairly certain it's not coincendence because the car runs like a bag of **** now when giving it the berries.
I had read up beforehand about how for a moment when changing gear and backing off the throttle it will run rich and it's obviously causing me issues where it's bogging down, causing a flat spot.
I'll be sticking the std recirc BOV back on, fingers crossed it goes back to normal.
In a moment of madness I went all chavtastic and stuck a VTA BOV on the Scooby
I know i know......in my defence though I went with the Forge BOV as it's a bit subtle below 3k and only really makes a fast and furious ppppssshhhhhh (or however the **** you write it) noise above 3-4K but I'm fairly certain it's not coincendence because the car runs like a bag of **** now when giving it the berries.
I had read up beforehand about how for a moment when changing gear and backing off the throttle it will run rich and it's obviously causing me issues where it's bogging down, causing a flat spot.
I'll be sticking the std recirc BOV back on, fingers crossed it goes back to normal.
Last edited by Wull; 26 November 2016 at 08:28 AM.
#3
Scooby Regular
Atleast the op has been honest
#6
Scooby Regular
iTrader: (8)
Well done for confessing your sin and admitting you have made a mistake
My last blob had a forge DV, and they are one of the better ones, but it still felt **** when giving it some (it was mapped in). I replaced it with a std recirc and it felt loads better, loads smoother on gear change
I won't fit another one and always discourage people from fitting one
My last blob had a forge DV, and they are one of the better ones, but it still felt **** when giving it some (it was mapped in). I replaced it with a std recirc and it felt loads better, loads smoother on gear change
I won't fit another one and always discourage people from fitting one
Trending Topics
#8
IVe got a forge one on my hatch was on when i bought the car i bought a standard one and it ran like **** :/ had like a throttle judder and flat spot was dead mad put the bov back on and ran sweet then again i dont really send it high on revs so not really loud
#10
Scooby Regular
Best getting one with adjustable spring tension so around town you get desirable chatter and on country lanes you get inner child grins. There's a point on my car where it both vents and chatters, then pops n cracks due to the slight overfuel - little things!
#11
Scooby Regular
Here's mine on an aps recirculating one
Last edited by ZANY; 28 November 2016 at 12:18 PM.
#12
Scooby Regular
I have what looks like a Tial copy (No markings)
I would like to fit a genuine Tial but don't want to have to re weld a new flange onto my inter cooler piping,
Are these flanges generic ?