windmill84

Hi guys,

Does anyone have a link for the adapters I need for these wheels to fit my 2005 WRX? The wheels in question are 18" 5x100 7.5J (not sure about the offset). We offered one wheel up to the hub and it looks like I need a spacer or adapter to make it fit properly. Also, which wheel nuts do I need because the standard ones don't fit...!

I thought lots of people on here had these wheels, so I didn't think I would have such a problem fitting them!

Many thanks in advance,
Rob.

JDM_Stig

iTrader: (3)

Are you sure you have the right wheels ?
I ran these wheels and never used any spacers, I thought the spacers were only required if you had Brembos, which on a wrx isnt standard, so not sure why there is a issue.

djandyg

iTrader: (2)

Iv got some 17 '' inovit redlined and they're a straight fit....

windmill84

Maybe I have the wrong wheels then... I bought them from someone on here so assumed that they would just fit seeing as they had the correct PCD.

When we offered the wheel up to the hub it fitted over the studs ok, but you could move the wheel up/down/left/right a bit on the hub if that makes sense? It's like the wheel needs and adapter to make the central hole smaller so it fits snugly on the hub. The wheel physically fits in the arch and over the brakes ok, it just doesn't fit tightly on the hub.... I hope I don't have the wrong wheels as I've just had them refurbed and bought new tyres for them!

windmill84

ok so it turns out that I need some spigot rings for the wheels. Anyone got a link for the correct ones for my wheels and car?