Subaru impreza gc8/type r forging
21 February 2015, 06:24 AM
#1
Scooby Regular
Thread Starter
Subaru impreza gc8/type r forging
What is the best possible route to go down to forge a gc8/type r?
If be looking to have power around 400/500bhp at the fly and would also like it as realisable as possible in both the engine and drive train
If be looking to have power around 400/500bhp at the fly and would also like it as realisable as possible in both the engine and drive train
21 February 2015, 06:19 PM
#6
Scooby Regular
iTrader: (1)
Join Date: Dec 2010
Location: Northumberland
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
What point is the car at now in terms of spec?
I would say if that's the total budget for everything listed above you would be better off going for a newage sti bottom end with supporting mods to suit and aiming for low 400s which the engine will handle as is.
Cheers Ross.
I would say if that's the total budget for everything listed above you would be better off going for a newage sti bottom end with supporting mods to suit and aiming for low 400s which the engine will handle as is.
Cheers Ross.
Last edited by roscom; 21 February 2015 at 06:21 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Danny0608
Subaru Parts
0
12 September 2015 02:59 PM