jaygsi

iTrader: (46)

I'm in the process of upgrading my standard intercooler on my 1998 Impreza, I posted a wanted add and searched the net, but they all looked rough.

So I was wondering could I get one refurbed? Is there a company that refurbs these? I can buy one new but that will be over £200

Davec30

iTrader: (2)

I done this. Got one from eBay. It had a a few rows of bent fin's and didn't look the best. I just sat with a mini screw driver and carefully straightened them out. I then gave it a couple of coats of silver paint.

Worth thinking about if you can get one cheap enough. Think mine was 30 quid with the undertry( only used the rubber and modded my original undertry)

jaygsi

iTrader: (46)

I've got one here, didn't realise they had an undertray. But as you said its battered.

I did think of straightening the fins and a light resray but I thought that may clog up the fins and undo all the work of fitting a bigger intercooler

Davec30

iTrader: (2)

Lightly spray it and it'll be fine. Mine certainly is. I widened the classic undertry to the size of the bigger intercooler and used the rubber off the new age. No point with the bigger cooler if you don't do something with the tray.

jaygsi

iTrader: (46)

Ok might give it ago, the one I have has bubbling on it so might look for another

ossett2k2

iTrader: (9)

What modifications are you having to make to the newage ic for it to fit your car jay?

jaygsi

iTrader: (46)

Nothing really hence why not going for STI intercooler

ossett2k2

iTrader: (9)

Ah I see! I'm still not sure if my intercooler is bigger than a standard wrx with it being the RA so I was thinking of going for the STI one. Don't suppose you have got measurements of the newage wrx and your standard one please? Also with mine being a V3 it has the metal pipe for the Recirc dumpvalve coming off the ic instead of a direct fit as the newage do so I would have to mod that as well.

jaygsi

iTrader: (46)

Yea sure will measure it for you later. I think the wrx intercooler will be abit bigger. But doesn't need anything modifying to fit.

And yes if you want to use the same dump valve you will need an adaptor there about £25+ on gay bay

Davec30

iTrader: (2)

You do need to bend the near side bracket slightly and alter one of the bolt holes to the engine.

jaygsi

iTrader: (46)

Did you still want those measurements?

banny sti

iTrader: (68)

I spoke to Simon god rest his soul, before I had mine mapped and he said it was pointless swapping my V5 sti tmic for a wrx one nothing to be gained at all.

ossett2k2

iTrader: (9)

I have a WRX RA so was going to swap mine for a STI one if that's bigger than the one I have on.


Yes please jay

banny sti

iTrader: (68)

I dont blieve its any bigger just has a silver finished as opposed to black, I really wouldn't bother mate unless you're going to do this

http://www.******.co.uk/scooby/article.php?id=3

ossett2k2

iTrader: (9)

Nice one banny. I don't think I will be heading north of 350bhp any time soon so will keep what I have then cheers
If I do decide to go bigger power then the intercooler is the least of my worries I recon!