NEED YOUR HELP!!!
#1
Scooby Newbie
Thread Starter
Join Date: Mar 2014
Location: london
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
NEED YOUR HELP!!!
i currently own a 96 subaru impreza wrx wagon, the car is running 300hp, has had a remap done to it, performance exhaust, air filter, and front mount intercooler. the car runs mint, but i have noticed that it doesnt have a dump valve/blow off valve (have only had the car for a week), so everytime i drive it and i put my foot down, i here the turbo flutter, which i beleive isnt good for the turbo, so im planning on getting a dump valve, but i havent owned a turbo car in years, my last one was a evo 4 but that had a top mount intercooler, so how would i install a dump valve on a front mount intercooler?
reply soon
thanks
reply soon
thanks
Trending Topics
#8
Scooby Regular
iTrader: (13)
Dump valves (recirc or open ) are usually fitted to one of the FMIC's two hard pipes - usually as close as possible to the throttle body inlet (so on the outlet pipe, downstream of the IC).
Ergo, most aftermarket FMIC IC pipes already have a DV take-off pre-welded in place, as part of the kit.
If not, then a machine shop can easily sort an appropriately cited DV take-off for you...
Ergo, most aftermarket FMIC IC pipes already have a DV take-off pre-welded in place, as part of the kit.
If not, then a machine shop can easily sort an appropriately cited DV take-off for you...
Last edited by joz8968; 22 March 2014 at 01:56 PM.