Scoobylive competitors cars and their specs
#1
Scooby Regular
Thread Starter
iTrader: (46)
Join Date: Nov 2005
Location: Probably polishing it.Lol
Posts: 5,381
Likes: 0
Received 0 Likes
on
0 Posts
Scoobylive competitors cars and their specs
I had a great day again and I would like to know what sort of power and spec the competitors were running.
Would any of the entrants mind posting their times and car spec.
Bob
Would any of the entrants mind posting their times and car spec.
Bob
#5
Scooby Regular
Join Date: Dec 2005
Location: Scoobysprint Privateers Champion 09
Posts: 608
Likes: 0
Received 0 Likes
on
0 Posts
Car number 11
Spec-C on Hydra ecu + other mods
460bhp on standard internals
11.8sec on the 1/4 mile
42.8sec on the handling (7th)
Spec-C on Hydra ecu + other mods
460bhp on standard internals
11.8sec on the 1/4 mile
42.8sec on the handling (7th)
Last edited by scoobytyson; 28 May 2008 at 10:55 PM.
Trending Topics
#11
Scooby Regular
iTrader: (8)
I pulled the gt30 off and fitted a gt35 and got it mapped low to keep my engine and clutch safe as its only a single plate clutch and the rods are only good for 500bhp I told pat to keep it at 1.5bar but I didnt expect 1.5bar to only be 450bhp I will sort it properly this year and get the gt35 mapped to its full glory It was me that came up to speak to you when your car was parked near the handling when your friend said he was you !! I was in black with some stupid shorts on
Last edited by stevebt; 27 May 2008 at 08:06 PM.
#12
Hi Steve,
Did you not say who you were?!?! I didn't realise it was you mate. TBH I had so many people say hello, to stop and chat and I never knew many as they didn't say who they were!
If I had known (perhaps you did say who you where, as I was in a world of my own that day), I would of had a good chat with you!
At least I can put a name to a face now.
The "friend" was actually Simon (the other Webmaster!).
Regards,
Shaun
Did you not say who you were?!?! I didn't realise it was you mate. TBH I had so many people say hello, to stop and chat and I never knew many as they didn't say who they were!
If I had known (perhaps you did say who you where, as I was in a world of my own that day), I would of had a good chat with you!
At least I can put a name to a face now.
The "friend" was actually Simon (the other Webmaster!).
Regards,
Shaun
#13
I actually asked him to have a go in my car when we were doing set-up and testing at Dono..... he refused, as he said his launches were not as good as mine. He didn't seem to have a problem on Sunday with 11.3's on a set-up that is far from finished!
#14
Unmapped 12.4s @ 105
iTrader: (29)
Join Date: Apr 2005
Location: Newcastle. 330bhp-289lb/ft @ 1bar boost - 12.4s @ 105mph
Posts: 11,776
Likes: 0
Received 4 Likes
on
4 Posts
Since you are aware of what Richard said about my engine compared to the conversion you run..... I best throw you the keys to my car at a future 1/4m event! Good time mate for the power you are running! Saying that, based on what Richard got in the Tracktive car (with a bit more power than me, with his race fuel map), I could throw my car keys at him as well!
I actually asked him to have a go in my car when we were doing set-up and testing at Dono..... he refused, as he said his launches were not as good as mine. He didn't seem to have a problem on Sunday with 11.3's on a set-up that is far from finished!
I actually asked him to have a go in my car when we were doing set-up and testing at Dono..... he refused, as he said his launches were not as good as mine. He didn't seem to have a problem on Sunday with 11.3's on a set-up that is far from finished!
12.4s on an unmapped 16g
#15
did a 12.08 @ 107mph
1.60 0to 60 ft
sti 8 uk standard 2.0 engine with md 321t rotated,front mount,650cc inj,parallel fuel lines,reversed inlet,light pulleys,flywheel,paddle clutch,fuel lab pressure reg,headers,full 3"exhaust
1.60 0to 60 ft
sti 8 uk standard 2.0 engine with md 321t rotated,front mount,650cc inj,parallel fuel lines,reversed inlet,light pulleys,flywheel,paddle clutch,fuel lab pressure reg,headers,full 3"exhaust
#16
Scooby Regular
Join Date: Dec 2005
Location: Scoobysprint Privateers Champion 09
Posts: 608
Likes: 0
Received 0 Likes
on
0 Posts
Since you are aware of what Richard said about my engine compared to the conversion you run..... I best throw you the keys to my car at a future 1/4m event! Good time mate for the power you are running! Saying that, based on what Richard got in the Tracktive car (with a bit more power than me, with his race fuel map), I could throw my car keys at him as well!
I actually asked him to have a go in my car when we were doing set-up and testing at Dono..... he refused, as he said his launches were not as good as mine. He didn't seem to have a problem on Sunday with 11.3's on a set-up that is far from finished!
I actually asked him to have a go in my car when we were doing set-up and testing at Dono..... he refused, as he said his launches were not as good as mine. He didn't seem to have a problem on Sunday with 11.3's on a set-up that is far from finished!
#18
Scooby Regular
Join Date: Jul 2005
Location: Running gt3542 rotated and loving the POWER!!!!!!!
Posts: 480
Likes: 0
Received 0 Likes
on
0 Posts
11.29@116 with 60ft of1.61 1994wrx last dyno run it made 444/442 @1.3bar
forged 2.5
hydra ems
owens developments Garrett
740cc injectors
and all the usual supporting mods
Cheers Dougie
forged 2.5
hydra ems
owens developments Garrett
740cc injectors
and all the usual supporting mods
Cheers Dougie
#20
Are you sure
Since you are aware of what Richard said about my engine compared to the conversion you run..... I best throw you the keys to my car at a future 1/4m event! Good time mate for the power you are running! Saying that, based on what Richard got in the Tracktive car (with a bit more power than me, with his race fuel map), I could throw my car keys at him as well!
I actually asked him to have a go in my car when we were doing set-up and testing at Dono..... he refused, as he said his launches were not as good as mine. He didn't seem to have a problem on Sunday with 11.3's on a set-up that is far from finished!
I actually asked him to have a go in my car when we were doing set-up and testing at Dono..... he refused, as he said his launches were not as good as mine. He didn't seem to have a problem on Sunday with 11.3's on a set-up that is far from finished!
His car on race should.will do better,,
It did a 1.6 60ft,,
My car did a 1.9 60ft and got 11.7@120mph at shakey in 9c temps
My car is 500bhp on pump fuel and weighs in at 1400kg,
i would expect a 1.7 60ft time in good weather.
So i am hoping for an 11.4
#22
Thought you broke yours and Mikee beat RCM in the final !
All those Scoobyclinic liveried cars, no wonder some got in the awards!!!
Damn, post delay ! Was replying to Kev/flat4
All those Scoobyclinic liveried cars, no wonder some got in the awards!!!
Damn, post delay ! Was replying to Kev/flat4
#23
Car number 19 clutch went on first 1/4 run when changing from 3rd to 4th but got a 12.07 and a 1.7 60ft i think,Got 4th overall on handling circuit did a low 41 sec but clutch had virtually no drive in 3rd and over excitement in getting into semi final and nerves led to school boy overshoot.
Car is 2ltr md321t apexi pfc,jollygreenmonster remap fmic 740s and other bits, dont no bhp figure.
Car is 2ltr md321t apexi pfc,jollygreenmonster remap fmic 740s and other bits, dont no bhp figure.
#25
Scooby Regular
Join Date: Dec 2005
Location: Scoobysprint Privateers Champion 09
Posts: 608
Likes: 0
Received 0 Likes
on
0 Posts
Car number 19 clutch went on first 1/4 run when changing from 3rd to 4th but got a 12.07 and a 1.7 60ft i think,Got 4th overall on handling circuit did a low 41 sec but clutch had virtually no drive in 3rd and over excitement in getting into semi final and nerves led to school boy overshoot.
Car is 2ltr md321t apexi pfc,jollygreenmonster remap fmic 740s and other bits, dont no bhp figure.
Car is 2ltr md321t apexi pfc,jollygreenmonster remap fmic 740s and other bits, dont no bhp figure.
#27
Scooby Regular
iTrader: (4)
Join Date: Sep 1999
Location: MY99UK-MY02STi-MY99Type R-MY06 T20-MY11 340R-MY05 TYPE25
Posts: 11,468
Received 22 Likes
on
19 Posts
Bog standard MY06 Litchfield Type 20
Lardy newage STi JDM (not spec C)
350bhp
17" bridgestone RE070's
blue side indicators
Car 32
Scooby shoot out Newbie and Old git
IIRC last results i looked at were
1/4 12.65s
Handling 43.5s
Tony
Lardy newage STi JDM (not spec C)
350bhp
17" bridgestone RE070's
blue side indicators
Car 32
Scooby shoot out Newbie and Old git
IIRC last results i looked at were
1/4 12.65s
Handling 43.5s
Tony
#28
Scoobyclinics Ice driver / standard engine
12.9 drag
44.5 handling 17th place and my 1st time on a handling track.
Well im happy had so much fun
12.9 drag
44.5 handling 17th place and my 1st time on a handling track.
Well im happy had so much fun
Last edited by IRC450STI; 28 May 2008 at 12:33 AM. Reason: error
#29
good
Car number 19 clutch went on first 1/4 run when changing from 3rd to 4th but got a 12.07 and a 1.7 60ft i think,Got 4th overall on handling circuit did a low 41 sec but clutch had virtually no drive in 3rd and over excitement in getting into semi final and nerves led to school boy overshoot.
Car is 2ltr md321t apexi pfc,jollygreenmonster remap fmic 740s and other bits, dont no bhp figure.
Car is 2ltr md321t apexi pfc,jollygreenmonster remap fmic 740s and other bits, dont no bhp figure.
I will see you at curbourgh on the 15th june,,
Good knows how you do it on those re 70's,
Changing mine to the ps2's