Project type r
create a photobucket account
select the image and copy the 'direct link'
then back in scoobynet, hit the photo icon
delete the httml etc
paste the photobucket link in
hope that helps
select the image and copy the 'direct link'
then back in scoobynet, hit the photo icon
delete the httml etc
paste the photobucket link in
hope that helps
Trending Topics
Finally got some pics up!!!
Here is my newest project!!!
The car was in fairly good shape when I bought it but after doing a few bits I decided to go the whole hog.
So far,
Flocked dash.
Painted the arches.
Painted engine bay.
Painted the boot floor.
All the underbody has been sealed.
Braided brake hoses.
Coilovers fitted.
Front mount intercooler on the way.
Blue samco hoses on the way.
Embroidered boot mat (sti) on the way.
Inlet manifold polished (a real pain)
Exhaust heat wrap on the way.
I'm trying this new water transfer method of putting a carbon look on so parts of the interior. In the pics you will see the attempt I made with carbon wrap but wasn't happy with it. Ill post the pics when it's done.
To be carboned.
Centre console.
Plastic above the clocks.
Small upper glove box.
Surround around the radio etc.
Heater vents.
Timing belt cover.
Fuse box cover.
Air box.
Some of the bits went for paint today bumpers mirrors grills etc all the little bits.
Revolution millenium wheels in 18" ordered gold of course, shoud be here in the week ish.
Looking forward to getting it back on the road, I'll keep the thread updated as things change :-)
Here is my newest project!!!
The car was in fairly good shape when I bought it but after doing a few bits I decided to go the whole hog.
So far,
Flocked dash.
Painted the arches.
Painted engine bay.
Painted the boot floor.
All the underbody has been sealed.
Braided brake hoses.
Coilovers fitted.
Front mount intercooler on the way.
Blue samco hoses on the way.
Embroidered boot mat (sti) on the way.
Inlet manifold polished (a real pain)
Exhaust heat wrap on the way.
I'm trying this new water transfer method of putting a carbon look on so parts of the interior. In the pics you will see the attempt I made with carbon wrap but wasn't happy with it. Ill post the pics when it's done.
To be carboned.
Centre console.
Plastic above the clocks.
Small upper glove box.
Surround around the radio etc.
Heater vents.
Timing belt cover.
Fuse box cover.
Air box.
Some of the bits went for paint today bumpers mirrors grills etc all the little bits.
Revolution millenium wheels in 18" ordered gold of course, shoud be here in the week ish.
Looking forward to getting it back on the road, I'll keep the thread updated as things change :-)
Only prob now is I can see the pics on the site but not on the app.
It's running about 350bhp at the min,
It's just had the bottom end done.
Going forward I'm not sure what I'm going to do, I have been tinkering with the idea of anti lag and launch control all depends on the budget as you can imagine it's not cheap getting this much work done.
I am open to any ideas anyone out there may have :-)
It's just had the bottom end done.
Going forward I'm not sure what I'm going to do, I have been tinkering with the idea of anti lag and launch control all depends on the budget as you can imagine it's not cheap getting this much work done.
I am open to any ideas anyone out there may have :-)
[IMG]://s1288.photobucket.com/user/andyburkee/media/Mobile%20Uploads/E741D155-CCAC-41F1-89E9-AB1CEAA2021E_zps6hosbxoy.jpg.html]
[/URL][/IMG]
Today's arrival now to try and get the exhaust off without breaking everything :-)
[/URL][/IMG]Today's arrival now to try and get the exhaust off without breaking everything :-)
My exhaust wrap arrived today.
Bit of welding to be done once I realised the heat shield was holding the exhaust together!!!
All sorted now :-)
Got the spare wheel well finished today too.
All going to plan I will have a few more bits tomorrow that will keep the momentum going.
Bit of welding to be done once I realised the heat shield was holding the exhaust together!!!
All sorted now :-)
Got the spare wheel well finished today too.
All going to plan I will have a few more bits tomorrow that will keep the momentum going.
Samco hoses arrived today!! Decided to do a few more bits while I was under the bonnet. 74f blue to paint, Rad cap. Top of power steering reservoir. Stripped and painted the alternator. New battery. Painted radiator and all new mounting rubbers. I have now taken most of the bolts and brackets out of the engine bay and painted them either black or cleaned them up and put a clear coat on them. New front mount intercooler will be here tomorrow. New wheels will be here at the weekend Flocked dash is ready to be collected Water transfer carbon will be done next week, paint mid next week, then the reassembly begins a few late nights will have the whole thing done. I would like to put a P1 front splitter on it if anyone has one for sale let me know.
[/IMG] [IMG]
[/IMG] [IMG]
[/IMG] [IMG]
[/IMG] [IMG]
[/IMG][IMG]
[/IMG] The decision will be to keep or to sell??
[/IMG] [IMG]
[/IMG] [IMG]
[/IMG] [IMG]
[/IMG] [IMG]
[/IMG][IMG]
[/IMG] The decision will be to keep or to sell??
Last edited by Andykart; Feb 6, 2014 at 09:41 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Phil3822
General Technical
0
Sep 30, 2015 06:29 PM







































