SteveP360's Widetrack Daily Driver
#1
Scooby Regular
Thread Starter
iTrader: (20)
Join Date: Jan 2005
Location: Northumberland
Posts: 1,961
Likes: 0
Received 0 Likes
on
0 Posts
SteveP360's Widetrack Daily Driver
Here's what I'm starting with. Collected it from Gatwick last week from big dave aka red devil 2. Got a few ideas kicking around. Nothing Major. Everything thats done to it can be easily removed and resold. Plan is to Ecutek it to around 350bhp, trick the suspension and do something special inside. Wanna keep it a smoker, as really like the stock look.
Its already been detangoed.
Inside is tidy.
Engine needs a clean.
And only 44k on the clock.
Its already been detangoed.
Inside is tidy.
Engine needs a clean.
And only 44k on the clock.
Last edited by stevep360; 23 May 2013 at 03:56 PM.
#2
Scooby Regular
Thread Starter
iTrader: (20)
Join Date: Jan 2005
Location: Northumberland
Posts: 1,961
Likes: 0
Received 0 Likes
on
0 Posts
Its now on the drive.
It drives like a dream, forgot how nice an unmodified subaru drives, clutch is light , its so quiet and it starts first time without going through a 720 crank like syvecs.
It needs a lot of cosmetics, which I can do myself to get it up to the standard of my last car. Looking forward to getting started.
It drives like a dream, forgot how nice an unmodified subaru drives, clutch is light , its so quiet and it starts first time without going through a 720 crank like syvecs.
It needs a lot of cosmetics, which I can do myself to get it up to the standard of my last car. Looking forward to getting started.
#4
Scooby Regular
Thread Starter
iTrader: (20)
Join Date: Jan 2005
Location: Northumberland
Posts: 1,961
Likes: 0
Received 0 Likes
on
0 Posts
Managed 2 hours on the car this afternoon
Got the full floor pan cleaned and refitted the carpet. Have also refitted a cleaned handbrake/gear lever surround and all the trims round the edge of the doors. Replaced passenger side trim that covers the seat belt, waiting for other side to arrive from dealers. They were heavily scratched.
Working on my Spec C seats tonight which are going back in. Gonna give them a clean before refitting. Have some raceglaze alcantara cleaner and will APC the backs and sides.
Got the full floor pan cleaned and refitted the carpet. Have also refitted a cleaned handbrake/gear lever surround and all the trims round the edge of the doors. Replaced passenger side trim that covers the seat belt, waiting for other side to arrive from dealers. They were heavily scratched.
Working on my Spec C seats tonight which are going back in. Gonna give them a clean before refitting. Have some raceglaze alcantara cleaner and will APC the backs and sides.
Last edited by stevep360; 23 May 2013 at 04:16 PM.
Trending Topics
#8
Scooby Regular
Thread Starter
iTrader: (20)
Join Date: Jan 2005
Location: Northumberland
Posts: 1,961
Likes: 0
Received 0 Likes
on
0 Posts
Right, back upright in.
Really pleased with this, its a WR1 rear seat. It was rotten when I got it, managed to bring it back like new, so I have put the one piece spec c rear in a plastic sealed back and put it in the loft. The Spec C rear is new and has never been used so ideal for a future project. The WR1 seat allows me to still re-use the luggage hatch which can come in handy. Off to finish the rear lower.
Really pleased with this, its a WR1 rear seat. It was rotten when I got it, managed to bring it back like new, so I have put the one piece spec c rear in a plastic sealed back and put it in the loft. The Spec C rear is new and has never been used so ideal for a future project. The WR1 seat allows me to still re-use the luggage hatch which can come in handy. Off to finish the rear lower.
#11
Scooby Regular
Thread Starter
iTrader: (20)
Join Date: Jan 2005
Location: Northumberland
Posts: 1,961
Likes: 0
Received 0 Likes
on
0 Posts
Time for a brew and spend some time with the misses, before she goes to bed and I can crack on
Full rears now in, very happy with them. They were f***ed when I got them. Have come up really nice.
Gonna get the fronts cleaned again shortly, you gotta do these seats a little at a time to get the best results I have found.
Full rears now in, very happy with them. They were f***ed when I got them. Have come up really nice.
Gonna get the fronts cleaned again shortly, you gotta do these seats a little at a time to get the best results I have found.
Last edited by stevep360; 23 May 2013 at 09:35 PM.
#12
Scooby Regular
Thread Starter
iTrader: (20)
Join Date: Jan 2005
Location: Northumberland
Posts: 1,961
Likes: 0
Received 0 Likes
on
0 Posts
I have heard you can buy a jet black one, they were in some JDM cars, have yet to see one, Scott at Scoobyspares says he has seen one and it looked awesome. Once the mats are in there is very little carpet visible.
#18
Scooby Regular
Thread Starter
iTrader: (20)
Join Date: Jan 2005
Location: Northumberland
Posts: 1,961
Likes: 0
Received 0 Likes
on
0 Posts
Centre console back in with replaced vents as originals were marked, that job was easy,
Went to put the seats back in and have found that the seat bases have different mounting points between an 03 sti and a widetrack/hawkeye. Ironically the mount point on the seats themselves are the same so next job is to swap the seat runners over. First one removed.
Hopefully get theseats in tonight
Went to put the seats back in and have found that the seat bases have different mounting points between an 03 sti and a widetrack/hawkeye. Ironically the mount point on the seats themselves are the same so next job is to swap the seat runners over. First one removed.
Hopefully get theseats in tonight
#19
Scooby Regular
iTrader: (13)
Join Date: Sep 2007
Location: east sussex
Posts: 810
Likes: 0
Received 0 Likes
on
0 Posts
What my 87p been bloody looking for that,a bulldog clip mmmm wasnt mine and the suckers from the gun maybe when me and the mrs was playing cowboys and indians lol,car is looking good steve and looks so much better with the spec c/wr1 interior in it,take it you will change the door cards as well to match??
will subscribe to your thread steve and looking forward to seeing what you do to her
#21
Scooby Regular
Join Date: May 2013
Location: East Grinstead
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
It might be easier to get hold of than you think mate, I have a UK spec 05 WRX and the carpet in mine is jet black. Not for sale though as it does look smart
#27
Scooby Regular
Thread Starter
iTrader: (20)
Join Date: Jan 2005
Location: Northumberland
Posts: 1,961
Likes: 0
Received 0 Likes
on
0 Posts
Quick update as have been busy on a few other things and on holiday. Alternator belt replaced. Lower zunsport grill fitted, debadged grill and upper custom zunsport mesh to match lower. Many thanks again to Ryan (prodriverules) for debadging and painting the upper grill and repainting the fog light covers as they were really bad. Ryans work never fails to amaze me with its quality and attention to detail.
Front end mods is pretty much done now. Couple of quick pics.
Front end mods is pretty much done now. Couple of quick pics.
Last edited by stevep360; 13 June 2013 at 04:05 PM.