my prodrive pack bugeye
Well thought i would start a sort of progress thread of my scooby as it is still relatively standard ive had it about 2 months now and i have sum planned mods for it most of u will probably already of seen it as ive posted a couple of threads before so here she is current mods are
ppp pack
prodrive exhaust
k&n filter
and unknown make chav valve



recieved this on saturday courtesy of rob day (cheers mate) so sort of my first mod lol

and recieved these today cant wait to get them fitted as they are well needed lol

also ordered this on friday as my current one looks like it has been in there since the war so im hoping it arrives either today or tomorrow

so thats it for now will keep updating when i make changes future mods will be refurbing the wheels once i decide on colour or changing them for a set of 18's and i want a high level spoiler as im not massively keen on the current one oh and a different exhaust dont want to squeeze to much power out of it as its done 90k so i think if i start pushing the engine it will pop so im gonna just wait till im a bit better financially and maybe save for a rebuild
cheeRS craig
ppp pack
prodrive exhaust
k&n filter
and unknown make chav valve



recieved this on saturday courtesy of rob day (cheers mate) so sort of my first mod lol

and recieved these today cant wait to get them fitted as they are well needed lol

also ordered this on friday as my current one looks like it has been in there since the war so im hoping it arrives either today or tomorrow

so thats it for now will keep updating when i make changes future mods will be refurbing the wheels once i decide on colour or changing them for a set of 18's and i want a high level spoiler as im not massively keen on the current one oh and a different exhaust dont want to squeeze to much power out of it as its done 90k so i think if i start pushing the engine it will pop so im gonna just wait till im a bit better financially and maybe save for a rebuild
cheeRS craig
Last edited by craigybaby; Jul 10, 2012 at 06:14 PM.
It has the Prodrive pack on it from Subaru different management exhaust etc i knw it hasnt got the prodrive bumpers but thought it would just put it as a thread title Cheers for kind comments though
Last edited by craigybaby; Jun 18, 2012 at 01:08 PM.
Trending Topics
got the springs fitted today god what a nightmare but its looking a bit more lower now back seems to have gone down more than the front but im hopin it will settle a bit more will take some better pics when i get chance
Change the wheels to some 18's as these ones look to small but gonna refurb these ones grey in the mean time then I want a decent exhaust system and buy some black headlights as I'm to nervous to try painting these ones myself lmao
Probably sti lamps as the prodrive seem to fetch top money lol Very interested if you still have it next month I will have it off you as funds are a bit tight at the moment is it a cat back and wht style exhaust tip?? I want to put more power under the bonnet but I'm worried about killing the engine because it's done 90k
Cheers merlin they are 40mm drop all round wish the front had gone down a bit better but hey ho ye tbh I haven't noticed a massive difference in the ride quality still a nice ride maybe slightly more bumpier nothing to shout about really
well thought i would give this a little update as been doing a few bits and bobs so firstly i found out i had fitted the springs back to front which is why i was squatting so swapped them over and it levelled out

well this week ive taken my wheels off to be refurbed as the one was buggered a friend of mine lent me his wheels just to sit it on whilst they are being done so she now looks like this

the offending wheel

the colour ive gone for is gun metal grey so im hoping it will look smart
well today i decided to paint my calipers as they were lookin a bit rusty it was pissing down so had to do them in my garage and its a bit tight lol

so here is what i started with

wire brushed them down and gave it a couple of coats of red paint

and then the lettering tbh its not the best i dont really have a steady hand lol but im hoping once the wheels are on it wont be that obvious that my colouring skills arent nop notch lol

whilst i was waiting for them to dry i looked at my wheel nuts and they looked a bit rusty and horrible i thought about buying a new set but thought i would have a go with some auto sol and im quite impressed with the results
so from this

to this

all 5 compared to the rear 5

so thats where im at so far my wheels should be finished on saturday will post pics of the finished result

well this week ive taken my wheels off to be refurbed as the one was buggered a friend of mine lent me his wheels just to sit it on whilst they are being done so she now looks like this

the offending wheel

the colour ive gone for is gun metal grey so im hoping it will look smart

well today i decided to paint my calipers as they were lookin a bit rusty it was pissing down so had to do them in my garage and its a bit tight lol

so here is what i started with

wire brushed them down and gave it a couple of coats of red paint

and then the lettering tbh its not the best i dont really have a steady hand lol but im hoping once the wheels are on it wont be that obvious that my colouring skills arent nop notch lol

whilst i was waiting for them to dry i looked at my wheel nuts and they looked a bit rusty and horrible i thought about buying a new set but thought i would have a go with some auto sol and im quite impressed with the results
so from this

to this

all 5 compared to the rear 5

so thats where im at so far my wheels should be finished on saturday will post pics of the finished result
Last edited by craigybaby; Jul 10, 2012 at 06:13 PM.





New one looks much fresher




