2003 BLOBEYE
07 December 2010, 03:55 PM
#2
Scooby Regular
iTrader: (6)
Join Date: Apr 2006
Location: Stoke On Where?
Posts: 764
Likes: 0
Received 0 Likes
on
0 Posts
Remove trim from around handel/lock that is used to opend the door, one screw there, one screw at the bottom of the hande you use to pull the door closed, one small screw at the top of the doorcard at the back just around the edge. Then pull quite firmly to unclip all the clips, and finally lift upwards to get around the cliups that hold it to the top of the door. Won`t go to far because you will need to unplug the loom from the window / lock controls.
11 December 2010, 10:19 AM
#4
Scooby Regular
iTrader: (6)
Join Date: Apr 2006
Location: Stoke On Where?
Posts: 764
Likes: 0
Received 0 Likes
on
0 Posts
no problem dude, if i remeber rightly I used corsa speaker adaptors to space my fronts correctly, required a little work but they were cheap and easy to get. 
Thread
Thread Starter
Forum
Replies
Last Post