project wrx clean up
#1
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: May 2007
Location: west mids
Posts: 338
Likes: 0
Received 0 Likes
on
0 Posts
project wrx clean up
i thought it was about time i started the big clean up on my car after the car parking dinks and running into the back of another car that dented the wing and bumper heres what ive done so far. ive got a new set of wheels waiting to go on. and iam after some 6 or 8 pot brakes.
ive started stripping the engine bay down to give it a good clean
stripped the wing off that was dented
ive started sanding down the car ready for the big respray iam thinking black but might go blue i still havnt made my mind up what do you think
this was my inlet after a quick spray just to see what yellow will look like. i still dont no which way to go with this what do you think.
i was thinking of a black car with yellow bits in the engine bay
ive started stripping the engine bay down to give it a good clean
stripped the wing off that was dented
ive started sanding down the car ready for the big respray iam thinking black but might go blue i still havnt made my mind up what do you think
this was my inlet after a quick spray just to see what yellow will look like. i still dont no which way to go with this what do you think.
i was thinking of a black car with yellow bits in the engine bay
Last edited by oadamo; 24 August 2009 at 12:07 PM.
#6
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: May 2007
Location: west mids
Posts: 338
Likes: 0
Received 0 Likes
on
0 Posts
the boot is all welded up now and the ariel hole in the back quarter panel, heres a little vid of the door poppers ive gotta weld the handles up then prep it all for the paint. i got a load more pics but there on the computer at the unit so i will upload when i get chance.
heres the engine bay after a bit of a clean.
vid of poppers lol can someone tell me if you can view this.
http://www.facebook.com/v/155521878209
lots more to come.
adam
heres the engine bay after a bit of a clean.
vid of poppers lol can someone tell me if you can view this.
http://www.facebook.com/v/155521878209
lots more to come.
adam
Last edited by oadamo; 18 September 2009 at 11:19 PM.
Trending Topics
#10
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: May 2007
Location: west mids
Posts: 338
Likes: 0
Received 0 Likes
on
0 Posts
i changed my mind on the yellow bits, so i just had them done black for now until i get the car painted. wait till you see the paint job its going to be a black base with graffiti style graphics
adam
adam
#12
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: May 2007
Location: west mids
Posts: 338
Likes: 0
Received 0 Likes
on
0 Posts
hopefully in the next 8 weeks, iam having a new spraybooth built but it should be finished next week, i bought a new set of rims thats going to be sprayed black aswell. fingers crossed it will look ok.
#14
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: May 2007
Location: west mids
Posts: 338
Likes: 0
Received 0 Likes
on
0 Posts
i used some engine degreaser and a paintbrush and a toothbrush lol. then i just let it sit for a few mins to soak then blow it all off with the air line, wear glasses if your going to do that, as it gos everywhere but its the only way to get it out of all the small holes and corners.
heres a quick pic of the boot and door theres still i bit to do before the paint but its getting there.
heres a quick pic of the boot and door theres still i bit to do before the paint but its getting there.
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
55
05 August 2018 07:02 AM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM