my scooby on its hooper project
#1
Scooby Regular
Thread Starter
iTrader: (2)
Join Date: Mar 2008
Location: gateshead
Posts: 586
Likes: 0
Received 0 Likes
on
0 Posts
my scooby on its hooper project
bought this wrx 95 bwt 2 weeks ago finally got some work done,
been working on these since late last night and there turning out good,
started with the back door handles and sprayed them they still need to be flat polished, and i did some smoothing to my front bumper and resprayed it. heres my pics i took
well first this is how it started
type r-a e.c.u
gready 05 turbo
gready paddle clutch
gready turbo timer and boost controler
full hks system
baileys dump valve
v6 bottom end
version 6 engine
esibach coilovers
and this is what i done today and last night
preped the back door handles and sprayed silver like i say still need flat ploished and they will match the car.
watch out for them wires
what a pleasure to work on a scooby everything is nice cards come off after 2 mins left with the lock just unbolt and screw and push it down to get to the handle bolts
then prep well and the finish product is good
now for the front bumper
what ugly things them washer jets are off with them,
unique i hope flushed out a bit of the bumper
my make shift booth with help from the dad
bit closer think my sanding was perfect for the filler if i dnt say so my self
last but not least my car looking unhappy with its self
stuff i need to do, spray my other handles, back quaterpannel 2 passenger doors, smooth splitter kit into bumper, fit wheels, make boot install. carbon bonnet, whats yous think
been working on these since late last night and there turning out good,
started with the back door handles and sprayed them they still need to be flat polished, and i did some smoothing to my front bumper and resprayed it. heres my pics i took
well first this is how it started
type r-a e.c.u
gready 05 turbo
gready paddle clutch
gready turbo timer and boost controler
full hks system
baileys dump valve
v6 bottom end
version 6 engine
esibach coilovers
and this is what i done today and last night
preped the back door handles and sprayed silver like i say still need flat ploished and they will match the car.
watch out for them wires
what a pleasure to work on a scooby everything is nice cards come off after 2 mins left with the lock just unbolt and screw and push it down to get to the handle bolts
then prep well and the finish product is good
now for the front bumper
what ugly things them washer jets are off with them,
unique i hope flushed out a bit of the bumper
my make shift booth with help from the dad
bit closer think my sanding was perfect for the filler if i dnt say so my self
last but not least my car looking unhappy with its self
stuff i need to do, spray my other handles, back quaterpannel 2 passenger doors, smooth splitter kit into bumper, fit wheels, make boot install. carbon bonnet, whats yous think
#3
Doing well so far, but as said above I think the bottom hole was to supply air to the brakes. When you took the bumper off was there a couple of plastic "funnel" type bits attached to it? Or did they get taken off when the intercooler was fitted?
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
Phil3822
General Technical
0
30 September 2015 06:29 PM