Wiseco 2.35 Stroker Pistons + New Rings
15 January 2009, 09:04 PM
#1
Former Sponsor
Thread Starter
iTrader: (30)
Join Date: Jan 2005
Location: FB Tuning Workshop - HP27
Posts: 4,219
Likes: 0
Received 0 Likes
on
0 Posts
Wiseco 2.35 Stroker Pistons + New Rings
I have a set of 4 Wiseco 97.5mm stroker pistons for sale.
They have had 10000 miles use, but are like new and in pristine condition as you can see in the photos below.
I have pulled these pistons out of my engine, as 2 of the bores were slightly too wide for them.
Will be sold complete with gudgeon pins and circlips, and a brand new set of rings, ready to fit.
Before you ask, they won't fit a 2 litre block, unless you've had it relinered to 2.2.
Looking for £400 + post, to include the new ring set.
Please PM me if you're interested.
They have had 10000 miles use, but are like new and in pristine condition as you can see in the photos below.
I have pulled these pistons out of my engine, as 2 of the bores were slightly too wide for them.
Will be sold complete with gudgeon pins and circlips, and a brand new set of rings, ready to fit.
Before you ask, they won't fit a 2 litre block, unless you've had it relinered to 2.2.
Looking for £400 + post, to include the new ring set.
Please PM me if you're interested.
Last edited by FB Tuning; 15 January 2009 at 09:10 PM.
16 January 2009, 09:27 AM
#2
If you don´t mind, I would offer the additional needed parts to make the engine complete (if you have the EJ22 block!) Took them out of my stroked engine, so all new as I decided to go the 2.2l route.
I have the shorter forged rods with bearings and crankshaft to fit to the phase 1 engine, as well as the multilayer steel headgasket!
Going for cheap, as the parts are just lying on my shelf for about 1 year now!
I have the shorter forged rods with bearings and crankshaft to fit to the phase 1 engine, as well as the multilayer steel headgasket!
Going for cheap, as the parts are just lying on my shelf for about 1 year now!
19 January 2009, 08:37 AM
#5
I do have the longer rods!
My pistons are the same and they are in my engine now with the stock length rods and the stock 75mm hub crank!
So my spare parts would make a full package with your pistons!
My pistons are the same and they are in my engine now with the stock length rods and the stock 75mm hub crank!
So my spare parts would make a full package with your pistons!
Thread
Thread Starter
Forum
Replies
Last Post
bluebullet29
General Technical
9
05 October 2015 02:17 PM