FOR SALE HIGHLY MODIFIED CLASSIC PARTS 500 - 600 BHP...!!
17 September 2008, 08:50 PM
#1
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Sep 2007
Posts: 407
Likes: 0
Received 0 Likes
on
0 Posts
FOR SALE HIGHLY MODIFIED CLASSIC PARTS 500 - 600 BHP...!!
i AM SELLING SOME PARTS TO FUND ANOTHER PROJECT.
TOMEI CON RODS - BRAND NEW IN BOX STILL SEALED COST £700
SERIOUS OFFERS
STI 5 CYLINDER HEADS - SERIOUS OFFERS
DRILLED OUT FOR LARGE HEAD STUDS, 1MM OVERSIZE INLET VALVES, 2MM OVERSIZE EXHAUST VALVES, HEADS MACHINED FOR HIGH LIFT CAMS, FULL PROFESSIONAL PORT AND POLISH, GRP A BILLET CAMS, HEAVY DUTY SPRINGS AND TITANIUM RETAINERS, I MAY NEED TO REPLACE A VALVE BUT WILL BE FULLY CHECKED BEFORE SALE, OR YOU CAN COME AND CHECK YOURSELF. tHESE HEADS ON MY CAR WORKED EXTREMELY WELL IT MADE 567BHP AT 1.9 BAR, 7150RPM AND WAS STILL CLIMBING VERY STEEPLY, BUT REV LIMIT WAS SET LOW TO PREVENT ENGINE DAMAGE. wENT FOR MORE BOOST ON RACE FUEL AND ROD LET GO....AWCH...SO SKINT NOW..!!
GREDDY EXHAUST SYSTEM TITANIUM - SLIGHT DAMAGE UNDER END CAN FROM GROUNDING BUT STILL PERFECTLY FINE
£300
JUN CAM PULLEYS BRAND NEW BEEN ON ENGINE 1 DAY BEFORE BLOW UP COST ME £650 FROM RCM
I HAVE SOME CUSCO 4 POINT UNDERBRACES SECOND HAND £50
1 NEW STILL SEALED CUSCO SINGLE UNDERBRACE BAR
STI 7 ORIGINAL SUBARU 2 PIECE SPOILER BRAND NEW UNPAINTED
ALL SORTS OF OTHER STUFF LET ME KNOW WHAT YOU NEED
PLEASE ALL THE STUFF I PURCHASE WAS BOUGHT EITHER THROUGH RCM OR OTHER WELL KNOWN COMPANIES IN UK, SO ALL IS ORIGINAL AND VERY EXPENSIVE PLEASE DONT MAKE SILLY OFFERS, THE HEADS ARE AS GOOD AS YOU ARE GOING TO FIND AND COST A FORTUNE...
JUST MAIL FOR MY NO
THANKS
Paul
TOMEI CON RODS - BRAND NEW IN BOX STILL SEALED COST £700
SERIOUS OFFERS
STI 5 CYLINDER HEADS - SERIOUS OFFERS
DRILLED OUT FOR LARGE HEAD STUDS, 1MM OVERSIZE INLET VALVES, 2MM OVERSIZE EXHAUST VALVES, HEADS MACHINED FOR HIGH LIFT CAMS, FULL PROFESSIONAL PORT AND POLISH, GRP A BILLET CAMS, HEAVY DUTY SPRINGS AND TITANIUM RETAINERS, I MAY NEED TO REPLACE A VALVE BUT WILL BE FULLY CHECKED BEFORE SALE, OR YOU CAN COME AND CHECK YOURSELF. tHESE HEADS ON MY CAR WORKED EXTREMELY WELL IT MADE 567BHP AT 1.9 BAR, 7150RPM AND WAS STILL CLIMBING VERY STEEPLY, BUT REV LIMIT WAS SET LOW TO PREVENT ENGINE DAMAGE. wENT FOR MORE BOOST ON RACE FUEL AND ROD LET GO....AWCH...SO SKINT NOW..!!
GREDDY EXHAUST SYSTEM TITANIUM - SLIGHT DAMAGE UNDER END CAN FROM GROUNDING BUT STILL PERFECTLY FINE
£300
JUN CAM PULLEYS BRAND NEW BEEN ON ENGINE 1 DAY BEFORE BLOW UP COST ME £650 FROM RCM
I HAVE SOME CUSCO 4 POINT UNDERBRACES SECOND HAND £50
1 NEW STILL SEALED CUSCO SINGLE UNDERBRACE BAR
STI 7 ORIGINAL SUBARU 2 PIECE SPOILER BRAND NEW UNPAINTED
ALL SORTS OF OTHER STUFF LET ME KNOW WHAT YOU NEED
PLEASE ALL THE STUFF I PURCHASE WAS BOUGHT EITHER THROUGH RCM OR OTHER WELL KNOWN COMPANIES IN UK, SO ALL IS ORIGINAL AND VERY EXPENSIVE PLEASE DONT MAKE SILLY OFFERS, THE HEADS ARE AS GOOD AS YOU ARE GOING TO FIND AND COST A FORTUNE...
JUST MAIL FOR MY NO
THANKS
Paul
24 September 2008, 09:23 AM
#7
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Sep 2007
Posts: 407
Likes: 0
Received 0 Likes
on
0 Posts
pulleys and rods
when i bought the parts last year that was the prices... rods where bought from rb motorsport i beleive to be official importer of tomei in uk, so i know they are genuine. With vat and delivery thats what they cost me, they are the rods with the 3/8 bolts aswell. Tomei used them in there circuit car wich was 550ps.
I am open to sensible offers i know i aint going to get near what i paid for them.
The cam pulleys cost me nearly £150 a pulley plus vat and carriage, do the others have them in stock i bet not...!!!!
I originally bought a set of jun pulleys from a company in japan.....wont mention it though, lets say they had to go back one of the pulleys timing marks was 20deg out and the belt retaining rings fell off...
Jun have since added spot welds to the new pulleys to stop this, these are the new pulleys.
So atleast we know the parts are genuine, and thats the reason for the costs.
any enquiries call me your welcome to come and inspect any of the parts.
thanks
paul
I am open to sensible offers i know i aint going to get near what i paid for them.
The cam pulleys cost me nearly £150 a pulley plus vat and carriage, do the others have them in stock i bet not...!!!!
I originally bought a set of jun pulleys from a company in japan.....wont mention it though, lets say they had to go back one of the pulleys timing marks was 20deg out and the belt retaining rings fell off...
Jun have since added spot welds to the new pulleys to stop this, these are the new pulleys.
So atleast we know the parts are genuine, and thats the reason for the costs.
any enquiries call me your welcome to come and inspect any of the parts.
thanks
paul
Trending Topics
24 September 2008, 01:40 PM
#10
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Sep 2007
Posts: 407
Likes: 0
Received 0 Likes
on
0 Posts
pics of pulleys and exhaust, im only in bolton so best to come and view if your in manchester, i can send you some pics of exhaust over email if you send an email address by pm.
I want £350 for pulleys, as someone has mentioned on the post they are available at £116.60 each so in the region of £480 now im not sure if that is with vat an import duty e.t.c of that site, but i will let these go for £350.
exhaust has the usual bottoming marks under end can, you really need to look at it, nice exhaust sounds very well.
£275
cheers
paul
I want £350 for pulleys, as someone has mentioned on the post they are available at £116.60 each so in the region of £480 now im not sure if that is with vat an import duty e.t.c of that site, but i will let these go for £350.
exhaust has the usual bottoming marks under end can, you really need to look at it, nice exhaust sounds very well.
£275
cheers
paul
08 November 2008, 01:24 PM
#17
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Sep 2007
Posts: 407
Likes: 0
Received 0 Likes
on
0 Posts
sold parts
just to answer a few questions
i have sold the exhaust system
i dont have induction kit
i have a couple of second hand cusco 4 point under chassis brace
cheers
i have sold the exhaust system
i dont have induction kit
i have a couple of second hand cusco 4 point under chassis brace
cheers
13 November 2008, 10:02 PM
#19
Scooby Regular
iTrader: (5)
Join Date: Mar 2003
Location: Aberdeen, White Classic Wagon, 6-Speed, Track Car
Posts: 788
Likes: 0
Received 0 Likes
on
0 Posts
BIGWRXY,
What condition are the under chassis braces in? i.e. any dents bends etc?
Interested if straight and undented.
Thanks
James
What condition are the under chassis braces in? i.e. any dents bends etc?
Interested if straight and undented.
Thanks
James
06 January 2009, 08:00 PM
#23
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Sep 2007
Posts: 407
Likes: 0
Received 0 Likes
on
0 Posts
spoiler sold last week for £90, sorry not been keeping my eye on here.
I still have the heads just looking at them at the moment just building a project engine arrow crank, cossie pistons and rods, dry sump e.t.c might use them again not sure yet though.
ill empty my mail .....sorry guys
i always have subaru stuff knockin about work for an importer so i can always get hold of stuff
I still have the heads just looking at them at the moment just building a project engine arrow crank, cossie pistons and rods, dry sump e.t.c might use them again not sure yet though.
ill empty my mail .....sorry guys
i always have subaru stuff knockin about work for an importer so i can always get hold of stuff
06 January 2009, 08:06 PM
#24
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Sep 2007
Posts: 407
Likes: 0
Received 0 Likes
on
0 Posts
also forgot got an engine being built at the moment if anyone needs a forged bottom end, will be ready in a week ish
semi closed deck block,
lightened and balanced sti 7 rear thrust crank,
eagle forged h beam rods with new 3/8 bolts
cp forged pistons 92.5mm
acl race bearings
no oil pump but can obviously fit at the right price
just being bored at the moment will have pics of the new parts and build
serious offers please..!
cheers
semi closed deck block,
lightened and balanced sti 7 rear thrust crank,
eagle forged h beam rods with new 3/8 bolts
cp forged pistons 92.5mm
acl race bearings
no oil pump but can obviously fit at the right price
just being bored at the moment will have pics of the new parts and build
serious offers please..!
cheers
