ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   Private For Sale - Car Parts & Accessories (https://www.scoobynet.com/private-for-sale-car-parts-and-accessories-353/)
-   -   FOR SALE HIGHLY MODIFIED CLASSIC PARTS 500 - 600 BHP...!! (https://www.scoobynet.com/private-for-sale-car-parts-and-accessories-353/712966-for-sale-highly-modified-classic-parts-500-600-bhp.html)

BIGWRXY 17 September 2008 08:50 PM

FOR SALE HIGHLY MODIFIED CLASSIC PARTS 500 - 600 BHP...!!
 
i AM SELLING SOME PARTS TO FUND ANOTHER PROJECT.

TOMEI CON RODS - BRAND NEW IN BOX STILL SEALED COST £700
SERIOUS OFFERS

STI 5 CYLINDER HEADS - SERIOUS OFFERS

DRILLED OUT FOR LARGE HEAD STUDS, 1MM OVERSIZE INLET VALVES, 2MM OVERSIZE EXHAUST VALVES, HEADS MACHINED FOR HIGH LIFT CAMS, FULL PROFESSIONAL PORT AND POLISH, GRP A BILLET CAMS, HEAVY DUTY SPRINGS AND TITANIUM RETAINERS, I MAY NEED TO REPLACE A VALVE BUT WILL BE FULLY CHECKED BEFORE SALE, OR YOU CAN COME AND CHECK YOURSELF. tHESE HEADS ON MY CAR WORKED EXTREMELY WELL IT MADE 567BHP AT 1.9 BAR, 7150RPM AND WAS STILL CLIMBING VERY STEEPLY, BUT REV LIMIT WAS SET LOW TO PREVENT ENGINE DAMAGE. wENT FOR MORE BOOST ON RACE FUEL AND ROD LET GO....AWCH...SO SKINT NOW..!!

GREDDY EXHAUST SYSTEM TITANIUM - SLIGHT DAMAGE UNDER END CAN FROM GROUNDING BUT STILL PERFECTLY FINE
£300


JUN CAM PULLEYS BRAND NEW BEEN ON ENGINE 1 DAY BEFORE BLOW UP COST ME £650 FROM RCM

I HAVE SOME CUSCO 4 POINT UNDERBRACES SECOND HAND £50
1 NEW STILL SEALED CUSCO SINGLE UNDERBRACE BAR

STI 7 ORIGINAL SUBARU 2 PIECE SPOILER BRAND NEW UNPAINTED

ALL SORTS OF OTHER STUFF LET ME KNOW WHAT YOU NEED

PLEASE ALL THE STUFF I PURCHASE WAS BOUGHT EITHER THROUGH RCM OR OTHER WELL KNOWN COMPANIES IN UK, SO ALL IS ORIGINAL AND VERY EXPENSIVE PLEASE DONT MAKE SILLY OFFERS, THE HEADS ARE AS GOOD AS YOU ARE GOING TO FIND AND COST A FORTUNE...


JUST MAIL FOR MY NO


THANKS
Paul

banny sti 17 September 2008 09:04 PM

Ball park price for the heads?

Banny

Lennard 17 September 2008 11:05 PM

What's special about the Jun cam pulleys since you can get them for 220 for a pair from places like nengun.com and the tomei rods can be had for 395 from flat4online.co.uk?

SUBKAR 17 September 2008 11:59 PM

Do you have any uprated ARB or droplinks?? Cheers

Andy916 18 September 2008 10:20 AM

Whereabouts are you?
Interested in the underbrace if I can collect.

scooby2nr 18 September 2008 11:38 AM

after some trick fuel rails for v5 sti?

BIGWRXY 24 September 2008 09:23 AM

pulleys and rods
 
when i bought the parts last year that was the prices... rods where bought from rb motorsport i beleive to be official importer of tomei in uk, so i know they are genuine. With vat and delivery thats what they cost me, they are the rods with the 3/8 bolts aswell. Tomei used them in there circuit car wich was 550ps.
I am open to sensible offers i know i aint going to get near what i paid for them.


The cam pulleys cost me nearly £150 a pulley plus vat and carriage, do the others have them in stock i bet not...!!!!
I originally bought a set of jun pulleys from a company in japan.....wont mention it though, lets say they had to go back one of the pulleys timing marks was 20deg out and the belt retaining rings fell off...
Jun have since added spot welds to the new pulleys to stop this, these are the new pulleys.

So atleast we know the parts are genuine, and thats the reason for the costs.
any enquiries call me your welcome to come and inspect any of the parts.
thanks
paul

shawy1976 24 September 2008 11:55 AM

any pics of the exhaust and jun pulleys :)

rooferman 24 September 2008 01:16 PM

Whats your location....??????

BIGWRXY 24 September 2008 01:40 PM

pics of pulleys and exhaust, im only in bolton so best to come and view if your in manchester, i can send you some pics of exhaust over email if you send an email address by pm.
I want £350 for pulleys, as someone has mentioned on the post they are available at £116.60 each so in the region of £480 now im not sure if that is with vat an import duty e.t.c of that site, but i will let these go for £350.

exhaust has the usual bottoming marks under end can, you really need to look at it, nice exhaust sounds very well.
£275
cheers
paul

scooby46 24 September 2008 09:00 PM

do you have a 3 bar map sensor? if you do pm me, cheers bud

OLLIeRB5 24 September 2008 09:11 PM

sorry... j16jrf thought it would be funny to insult people as i left myself logged in

sorry

reeperb5 25 September 2008 07:53 PM

where you based.. if the H brace is still available??? does it make any real difference to the handling?

green fast machine 26 September 2008 06:26 PM

hes based in bolton which is near manchester

matey

Naddoo_TypeRA 05 November 2008 09:44 AM

DO you have any uprated full induction kit. ?

AdamJ 06 November 2008 08:20 AM

Is it a full exhaust system Or Cat back?

BIGWRXY 08 November 2008 01:24 PM

sold parts
 
just to answer a few questions

i have sold the exhaust system

i dont have induction kit

i have a couple of second hand cusco 4 point under chassis brace

cheers

garetgax 13 November 2008 06:58 PM

ecu?

RS2 JIM 13 November 2008 10:02 PM

BIGWRXY,

What condition are the under chassis braces in? i.e. any dents bends etc?

Interested if straight and undented.

Thanks

James

Frecklish 05 January 2009 11:09 PM

Your mailbox is full.

How much for the genuine STI7 rear spoiler? Is fiting included?

/Filip

scoobyschef 05 January 2009 11:26 PM

do you still have the sti heads if so what price you looking at, pm me a price

jim

vince-sti02 06 January 2009 05:41 PM

first dib's on the spoiler please
please confirm it has the fitting plate.
and price

cheers

BIGWRXY 06 January 2009 08:00 PM

spoiler sold last week for £90, sorry not been keeping my eye on here.
I still have the heads just looking at them at the moment just building a project engine arrow crank, cossie pistons and rods, dry sump e.t.c might use them again not sure yet though.
ill empty my mail .....sorry guys
i always have subaru stuff knockin about work for an importer so i can always get hold of stuff

BIGWRXY 06 January 2009 08:06 PM

also forgot got an engine being built at the moment if anyone needs a forged bottom end, will be ready in a week ish
semi closed deck block,
lightened and balanced sti 7 rear thrust crank,
eagle forged h beam rods with new 3/8 bolts
cp forged pistons 92.5mm
acl race bearings
no oil pump but can obviously fit at the right price
just being bored at the moment will have pics of the new parts and build

serious offers please..!

cheers

dazdavies 09 January 2009 01:02 PM

What turbo did this use and is it for sale?

BIGWRXY 11 January 2009 02:24 PM

ran a gt3540 not selling it.
cheers

thewhitewarrior 15 January 2009 09:34 PM

what injectors did you have in, if 850s what price, cheers phil.

widdows 17 January 2009 04:14 PM

have you got an alloy rad for sale by any chance?

2-pump-tone 18 January 2009 04:08 PM

yhpm:)

simon no.64catalunya 21 January 2009 09:28 PM

how much for the heads and rods


All times are GMT +1. The time now is 07:35 PM.


© 2024 MH Sub I, LLC dba Internet Brands