complete closed deck 2.5 engine not ej257.

Resleeved ej22T (closed deck with oil squirters) with diesel top hat liners done by smg tuning.

Farnden forged billet crank (1500 alone!)

PAR rods (proven to over 800bhp)

JE custom pistons (teflon coated)

12X14mm head studs

available with matched ported and flowed cylinder head with double sprung billet valves, and custom retainers and shimming,

dh22 profile cams

kent vernier pulleys

kevlar cam belt

professionally built and ru in and dynoed by DTW, dyno print outs at 555bhp and 556lbft on super unleaded with NF, building receipts alone to well over £3k

Engine has been built with strength in mind for max power output from a subaru.

£offers

plus will sell off all associated bits required to get the car to support this kind of power.

Including

PAR synchro gearbox - quaife LSD with 3.9 final drive. rear R180 plated diff with matching final drive.


GT30R turbo with 45 degree rotated uppipe and downpipe
race gate wastegate to suit uppipe for rejoining to downpipe


Custco twin plate clutch, capable of handling 650lbft yet is still comfortable to drive. about 200 miles use


Lateral performance intercooler set up with rad and fans and pipework to suit turbo and reversed inlet manifold.


Pectel T6 2000 ecu including loom adapter for version 3/4 cars, and custom loom for use with inlet manifold. Included timiing wheel. Ideally should be sold with engine.

Air injectors for use with above and external wastegate

Lateral performance custom baffled sump.

uprated engine and gearbox mounts.

Please note, willing to break up, only if it looks like a substantial fraction is going.


offers by pm or ring to discuss

07977 127101

 

ok, sale still on.

long block for sale. Call for spec, but it pretty much is higher than anything you have seen and is the spec you would choose for 600+bhp with no holds barred! Including bits that others dont bother with such as billet forged crank, teflon coated piston skirts, 12x14mm head studs, double sprung custom billet valves etc.

Selling separate from inlet manifold.

brand new phase 2 550 injectors that have been modded to flow 850cc by lateral performance. Brand new and unused and matched for even flow.

2 bullet fuel filters clamps and fittings. red. unscratched.

PAR 5 speed synchro mesh gearbox with spark eroded fifth having two woodruff keys. Has been running 550bhp and lbft.

cord supplied phase 1 cncd billet fuel rails that take phase 2 injectors.

sx fuel reg.

nology spark plug leads for phase 1.5 engine set up.

MSD ignition module.

Pectel T6 2000 ecu, with loom adapter for running on a phase 1.5 set up. Loom adapter runs ecu input of oil pressure, oil temperature for auto shut down if things look bad! - £1700 complete - this is still available new for over 3k plus vat.

2x bosch wideband lambda sensors with pectel plugs. One has had about 50 miles use, the other is unused.

Exede twin plate clutch and matching lightweight - 100 miles use.

Lateral performance baffled winged sump.

Loads more stuff, call me if you have something in mind that I havent mentioned, that you would consider in building a monster set up.

If you don't see a price, mail me an offer.

 

PM sent reference injectors and sx reg.

thanks

Dave

 

pm replied to re injectors and reg.

 

does reg come with gauge ?

matt

 

reg - sold

injectors - sold

gearbox - sold

intercooler and turbo set up - provisionally sold

msd - sold

surface discharge plugs - sold

air injectors - sold



still available:

exede twin plate clutch and flywheel

short and long block

ecu and loom

8 injector inlet manifold

hks headers

lateral performance baffled winged sump

 

yhpm

 

also uprated mounts for engine and gearbox.

and a complete set of powerflex bushes, except for the rear anti rollbar.

still boxed and packaged as new.

 

yhpm.

 

How much for the HKS headers and are they wrapped etc?

 

they are wrapped but they are provisionally sold.

 

how much for the turbo?

cheers dan

 

How much for the upratde mounts and clutch?

thanks
banny

 

reg - sold

injectors - sold

gearbox - sold

intercooler and turbo set up - sold

msd - sold

surface discharge plugs - sold

air injectors - sold

exede twin plate clutch and flywheel - sold

uprated gearbox and engine mounts - sold

short and long block - sold

8 injector inlet manifold - provisionally sold

hks headers - deposit taken


still available:

lateral performance baffled winged sump

ecu and loom

very complete set of polyflex bushes for classic

10 bottles of NF race - the better older stuff

 

Adam you have pm regarding Sump & Bushes.

Thanks
Chris.

 

reg - sold

injectors - sold

gearbox - sold

intercooler and turbo set up - sold

msd - sold

surface discharge plugs - sold

air injectors - sold

exede twin plate clutch and flywheel - sold

uprated gearbox and engine mounts - sold

short and long block - sold

8 injector inlet manifold - provisionally sold

hks headers - deposit taken

lateral performance baffled winged sump - provisionally sold

very complete set of polyflex bushes for classic - provisionally sold


still available:

ecu and loom

10 bottles of NF race - the better older stuff