Samco Hoses and various D/V Take offs
Thread Starter
Scooby Regular
Joined: Oct 2002
Posts: 2,046
Likes: 0
From: North Staffs. UK
Samco Hoses and various D/V Take offs
For Sale : Various SAMCO Hoses, joiners and Dump Valve Take-offs -
bought for a project - completed another way, so all AS NEW.
Offers for individual items.....
Alloy Dump Valve T-Piece 2" OD 120mm Long 1" Take off
Bailey (ATP 26/2.5) 2.75" OD Alloy D/V T-Piece
Alloy Hose Insert 25mm (For Joining Hoses)
Samco 3 ply hose (Blue) 25mm x 1m straight length
Samco 3 ply hose (Blue) straight reducer 35mm->28mm
Samco 3 ply hose (Blue) 45 degree bend 25mm id
Samco 3 ply hose (Blue) 90 degree bend 25mm id
bought for a project - completed another way, so all AS NEW.
Offers for individual items.....
Alloy Dump Valve T-Piece 2" OD 120mm Long 1" Take off
Bailey (ATP 26/2.5) 2.75" OD Alloy D/V T-Piece
Alloy Hose Insert 25mm (For Joining Hoses)
Samco 3 ply hose (Blue) 25mm x 1m straight length
Samco 3 ply hose (Blue) straight reducer 35mm->28mm
Samco 3 ply hose (Blue) 45 degree bend 25mm id
Samco 3 ply hose (Blue) 90 degree bend 25mm id
Last edited by markwild; Mar 26, 2005 at 08:49 AM.
Thread Starter
Scooby Regular
Joined: Oct 2002
Posts: 2,046
Likes: 0
From: North Staffs. UK
They're all non-specific fit I'm afraid (i.e. bought as 25mm hoses, rather than for a specific place, like the radiator).
Its possible that they fit, but I wouldn't know - I bought them to route a D/V from a hybrid FMIC across the front of the engine to a 'T' fitted to a prodrive inlet pipe - but ended up just binning the D/V
You'd have to take off the old hose and give it a measure -
Mark
Its possible that they fit, but I wouldn't know - I bought them to route a D/V from a hybrid FMIC across the front of the engine to a 'T' fitted to a prodrive inlet pipe - but ended up just binning the D/V
You'd have to take off the old hose and give it a measure -
Mark
Scooby Regular
Joined: Aug 2003
Posts: 738
Likes: 0
hiya mate the 90 degree samco...
i have a pipe next to the turbo thats 90 degrees and comes out and down...was covered in some heat resistant silvery stuff
hopefully this will be suitable, what ya think?
will have to remove tmora and check it...mines had something nibble throo it i think!!!
think the bore may be ok....we'll see..what ya want for it?
regards chris
i have a pipe next to the turbo thats 90 degrees and comes out and down...was covered in some heat resistant silvery stuff
hopefully this will be suitable, what ya think?
will have to remove tmora and check it...mines had something nibble throo it i think!!!
think the bore may be ok....we'll see..what ya want for it?
regards chris
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
