Samco Hoses and various D/V Take offs
24 February 2005, 09:27 AM
#1
Scooby Regular
Thread Starter
Join Date: Oct 2002
Location: North Staffs. UK
Posts: 2,046
Likes: 0
Received 0 Likes
on
0 Posts
Samco Hoses and various D/V Take offs
For Sale : Various SAMCO Hoses, joiners and Dump Valve Take-offs -
bought for a project - completed another way, so all AS NEW.
Offers for individual items.....
Alloy Dump Valve T-Piece 2" OD 120mm Long 1" Take off
Bailey (ATP 26/2.5) 2.75" OD Alloy D/V T-Piece
Alloy Hose Insert 25mm (For Joining Hoses)
Samco 3 ply hose (Blue) 25mm x 1m straight length
Samco 3 ply hose (Blue) straight reducer 35mm->28mm
Samco 3 ply hose (Blue) 45 degree bend 25mm id
Samco 3 ply hose (Blue) 90 degree bend 25mm id
bought for a project - completed another way, so all AS NEW.
Offers for individual items.....
Alloy Dump Valve T-Piece 2" OD 120mm Long 1" Take off
Bailey (ATP 26/2.5) 2.75" OD Alloy D/V T-Piece
Alloy Hose Insert 25mm (For Joining Hoses)
Samco 3 ply hose (Blue) 25mm x 1m straight length
Samco 3 ply hose (Blue) straight reducer 35mm->28mm
Samco 3 ply hose (Blue) 45 degree bend 25mm id
Samco 3 ply hose (Blue) 90 degree bend 25mm id
Last edited by markwild; 26 March 2005 at 08:49 AM.
04 March 2005, 08:38 PM
#3
Scooby Regular
iTrader: (2)
Join Date: Nov 2004
Location: Norwich
Posts: 761
Likes: 0
Received 0 Likes
on
0 Posts
Are any of those hoses a top radiator one? specifically the one that goes under the induction piping just to the right of the MAF? sorry about my location description lol.
04 March 2005, 09:43 PM
#4
Scooby Regular
Thread Starter
Join Date: Oct 2002
Location: North Staffs. UK
Posts: 2,046
Likes: 0
Received 0 Likes
on
0 Posts
They're all non-specific fit I'm afraid (i.e. bought as 25mm hoses, rather than for a specific place, like the radiator).
Its possible that they fit, but I wouldn't know - I bought them to route a D/V from a hybrid FMIC across the front of the engine to a 'T' fitted to a prodrive inlet pipe - but ended up just binning the D/V
You'd have to take off the old hose and give it a measure -
Mark
Its possible that they fit, but I wouldn't know - I bought them to route a D/V from a hybrid FMIC across the front of the engine to a 'T' fitted to a prodrive inlet pipe - but ended up just binning the D/V
You'd have to take off the old hose and give it a measure -
Mark
09 March 2005, 08:56 PM
#5
Scooby Regular
Join Date: Aug 2003
Posts: 738
Likes: 0
Received 0 Likes
on
0 Posts
hiya mate the 90 degree samco...
i have a pipe next to the turbo thats 90 degrees and comes out and down...was covered in some heat resistant silvery stuff
hopefully this will be suitable, what ya think?
will have to remove tmora and check it...mines had something nibble throo it i think!!!
think the bore may be ok....we'll see..what ya want for it?
regards chris
i have a pipe next to the turbo thats 90 degrees and comes out and down...was covered in some heat resistant silvery stuff
hopefully this will be suitable, what ya think?
will have to remove tmora and check it...mines had something nibble throo it i think!!!
think the bore may be ok....we'll see..what ya want for it?
regards chris
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
