right folks the rears are complete, calipers, disc,half worn pads,back plate with handbrake mechanism and hub. one caliper has a scuff on the front otherwise ok

the fronts,one caliper is good odd small scuff with disc and well worn pads
the other front is in need of blasting really as the scuffs are quite big and needs a minor repair to where the banjo bolts in(tig welding then re tapping)and has no disc.


£600ono
ask any questions ive tried to describe them as genuinly as i can so ya know they arent mint.
andy

 

Are these transposable onto earlier cars ?

 

I believe so, Money has done it, best to contact him.

 

Yes goes straight on. Rears are slightly trickier.

 

Ive done the rears and dont go straight on. You need sh*t loads of other bits. lol

Fronts will only go on if you have the right offset. They wont fit on 18s with classic offsets - offset needs to be later scoobs

 

It was the rears I was interested in.....new hubs driveshafts etc ?

 

Basically yep.

I got my rear hubs and shafts when i fitted the 6speed and rear diff from a breakers - cost was £350 i think.

Definitely worthwhile as:

A - i could fit the 6speed rear diff
B - the size of the discs and calipers look bloody massive compared to the old ones. lol

Havent got pics yet but will try to get soem tonight

 

hi catalunya the rears come with the hubs m8 ihavent got the rear shafts though. oooh go on treat yourselflol

 

BTTT and £100 cheaper.

 

Want sell the rears seperately ?

Mark A

 

YHPM MARK A

 

I might be interested in the fronts for another car i'm preparing for track days if there at a good price bearing in mind the repairs they need doing, reply to me at my email please as i cant check here as often as i would like.

Barnsey1971@aol.com

 

How much for the frt callipers???

 

BTTT

 

YHPM Busman
thx
Andy

 

BREMBOS!!!! BREMBOS!!!!!!!!! COME AND GET YA BREMBOS.
1 front caliper new is £450+!
here we have both fronts (granted one is damaged but will repair for about £15-20) and both rears with discs, back plate, handbrake mechanism and hubs and i think the bearings are in the hubs aswell all for £500.
theyre that cheap ive nearly bought the buggers myself twice

 

I have a pair of rear brembos with the pads and discs but thought I just needed the plates, what else do I need to put on my MY03 WRX. I would be interested in thos bits you have for sale...let me know.

Mark

 

hi mark
if ya have a look at moneys post a bit higher up hes done it himself m8 ya need hubs and shafts aparently. i was hoping to sell them all complete as if i split the hubs then if anyone buys these they will need to source some hubs again.rear shafts are about £75 a piece i think which makes the hubs £100 each(going by moneys £350 for hubs and shafts that is).

so if ya take £200 off for the hubs it makes all my calipers,discs and backplates £300 Im expecting a call from David Dickinson at any moment

 

Surely if you changed the driveshafts you would have to change the rear diff to one that fits the new driveshafts?

 

not if you swap your shaft ends tap out the cir clip and the end comes off

 

Ahhh so surely you just need shaft ends then ?

 

erm no ya need the hub end and the shaft and put your diff end on the shaft that fits the hub
chances of a breaker splitting em is a bit slim though unless the cars crashed and pulled the diff end apart and split the bearing.(ive got one like that here)

 

hang on yes you could do it the other way rouind and swap ya hub end(i assume that ends held on with a cir clip aswell)lol

 

NOW SOLD THX