SECS S1003 Psi3 unit to suit MY99/00 UK or Import.

Complete with connecting cable and dash top mounting pod. (I'll need your std pod for my car)

Pic here http://www.scoobyworld.co.uk/s1003_small.jpg

The S.E.C.S. Data monitor connects directly to the ECU port (under the steering column) so installation couldn't be easier, just plug in and away you go!

A whole host of options are available from the user interface to display any of the following data in realtime on the go:

(display layout can be custom configured)
- Battery voltage - Volts
- Engine Speed - RPM
- Vehicle road speed - MPH or KMH
- Coolant temperature - Degrees C
- Fuel injector pulse width - Milliseconds
- Ignition point - degrees BTDC
- Knock correct - degrees (ignition timing)
- Lambda air/fuel ratio
- Throttle position - %
- Air flow meter mass - Grammes per second
- Boost pressure - Bar

Also features user adjustable alarms for monitoring

- Battery voltage low
- Battery voltage high
- Boost pressure
- Coolant temperature

PLUS! Records peak readings
- Engine speed - RPM
- Boost Pressure
- Road Speed
- Coolant Temperature

Finally can even display a clock!!

The unit fits into the centre pod on the classic shape , once fitted, its simply a case of plugging in the cable to the ECU connector below the steering column and off you go.

They are approx £380 new, £225 secures.

Andy

 

I know someone who might be interested in this Andy. He's got a lagacy though, so the exchange pod won't work !
I'l mail him in the morning and find out if he fancies it.

p.s. You have PM about something else..

 

How easy is this to fit can any one just about do it. And how about if i wanted it could i collect . if so where r u.What do u mean about exchanging the pod?


cheers zander

 

Do u mean the lid for the center bit. Sorry about me being a bit dumb
£225 aint a problem if it will fit ok iv'e got a rb5 t99 .
thanks
Zander

 

Hi Zander

Yes it will fit an RB5. I don't now need an exchange lid as the previous owner (thanks Steve) is giving me the original lid for the car.
I'm in Edinburgh but it would only cost around £8 to send special delivery.

To fit it involves removing 4 small screws to take your existing lid off, then fit this one back on in its place. Then simply plug it in to the socket under the steering.

Andy

 

It would be the payment i live in wishaw would be ok if u wanted to meet me some where if that would suit u better.Do u have the instructions an thing's to go with it.

Andy yhpm

Thanks

Zander

 

hi m8
if zander gives back word, seconds 4 me!!!!!

Peppe

 

Andy,

yhm

Steve

 

How about i come up on wed nite.Is that ok for u?

 

Yes, that's fine. I'll phone you later today.

Andy

 

Ooops, appears that the UK and Import have a different enclosure on the top of the dash ?
This will run ok in either but only fits the dashtop of the Import.

(sorry for your wasted trip Zander)

Andy

 

Not a problem Andy thanks any way.

Cheers

Zander

 

Will it fit a 03 STI8 PPP Andy?

If so I can Paypal as normal

 

Zander - you still got this?

 

brian ya muppet, it's andy thats sellin it!!!!

customscooby

unfortunately it won't fit that style of car unless you buy a different pod or admit to it not fitting right

 

Whoops!!

 

 

Andy YHM