ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   General Technical (https://www.scoobynet.com/general-technical-10/)
-   -   P0607 control module limp home mode (https://www.scoobynet.com/general-technical-10/940968-p0607-control-module-limp-home-mode.html)

davefaedeen 26 June 2012 10:53 PM

P0607 control module limp home mode
 
Car went into limp home mode with the cel on this evening :( pulled over and gave the engine a once over nothing seemed wrong Restarted the car and the cel light was still on but the car drove fine. Got the local garage to check the code and it flaged up p0607 control module, we cleared the fault and all is fine for now Any ideas what caused it, this may be unrelated but I fitted a bailey Vta yesterday could this be the problem? I removed it tand put the standard valve back on just encase

My car it a 2005 55 hawkeye sti with 36k and a fssh with no mods...!

Cheers guys look forward to some suggestions

360ste 26 June 2012 10:58 PM

Could have been, as with the VTA the fueling would be messed up as the MAF says it is getting X amount of air so the ECU gives the engine a set amount of fuel but when you close the throttle the VTA dumps some of the air so you are now running rich. IMO

davefaedeen 26 June 2012 11:08 PM

This was my initial thought!! Hence removing it all my other scoobys have been mapped when vta's have been fitted,, I guess you live and learn!! Hopefully it won't come back again!!!

r1c 26 June 2012 11:25 PM

A quick google search says its to do with throttle control, possibly cured by a dealer software update.

r1c 26 June 2012 11:30 PM

Even better, try reading this
https://www.scoobynet.com/general-te...-light-on.html

davefaedeen 27 June 2012 09:40 AM

hi R1c i had alook at that post yesterday but my car ran fine after a restart all be it with the CEL still showing, the issue in that post didnt allow the guy to get out of limp home mode. the plot thickens!!

davefaedeen 27 June 2012 09:41 AM

drove the car to work this morning 30miles and all is well for now....

davefaedeen 27 June 2012 02:39 PM

anyone else had this problem??

tee Spec D 12 April 2014 12:11 AM

did you get this sorted in the end matey?

as i have got the same problem with my car now.

i know this is an old thread but i thought i could try

davefaedeen 12 April 2014 12:19 AM

It never came back, I got the car remapped a week or 2 afterwords with a gfb vta, however it turned out that my head gasket had gone :( not sure if this was related though but worth checking.

tee Spec D 12 April 2014 01:39 AM

Thanks for the reply

How do you check for head gasket?
Heaters?
Mayo in coolant ?

davefaedeen 12 April 2014 08:40 AM

Check out my post on SS


http://www.scottishscoobies.net/show...t-looking-good


All times are GMT +1. The time now is 02:16 AM.


© 2024 MH Sub I, LLC dba Internet Brands