flocked dash
Does anyone no of a supplier of that material that they put on the dash,or a shop that sells it.cheers
|
There,s a place in Banbury that does it, Hrrr, can,t fooking remember it,s name though.....:o :cuckoo:
|
|
|
i wanna do this. not sure on taking the dash out tho :(
|
|
Qualplast in Great Barr, Birmingham did mine.
Superb finish and great service from them. Highly recommended Cheers Rob |
bit of a long shot,...but anyone know if there is a how-to, on removing dashboards?
dan |
Originally Posted by HT04
(Post 8333632)
bit of a long shot,...but anyone know if there is a how-to, on removing dashboards?
dan Have a search on here, I`m sure there`s a `how to` somewhere NASIOC There defo one for a roof vent ;) |
that damn roof vent. lol. i had forgotten about that. lol. its for sale if ya want matey.
dan |
Originally Posted by HT04
(Post 8333644)
that damn roof vent. lol. i had forgotten about that. lol. its for sale if ya want matey.
dan I think you may aswel fit it now :thumb: |
Originally Posted by HT04
(Post 8333632)
bit of a long shot,...but anyone know if there is a how-to, on removing dashboards?
dan I downloaded Slipstrem UK's workshop manual, that helped quite alot too. https://www.scoobynet.com/general-te...w-updated.html Steve |
Originally Posted by Steve Gibbins
(Post 8333817)
I did mine back in September on my 03 Sti so should be the same as yours. The worst bit as I remember was getting to some of the wiring loom that was attached to the underside of the dash. You couldn't get to a clip because the heater ducts were in the way, also the LED for the alarm/immobilser next to the clock has no connector in the wire so I cut it and then resoldered once the dash was back in. One other thing, the thin panel across the bottom of the windscreen with the sensor in is a seperate piece, you need to remove this first by taking off the A-pillar covers and then pulling it up from each side, behind this are two of the bolts that hold the dashboard in place.
I downloaded Slipstrem UK's workshop manual, that helped quite alot too. https://www.scoobynet.com/general-te...w-updated.html Steve wow. ok matey. cool. i cant seem to download from that link.:(. wanna come and remove it for me? lol dan |
Originally Posted by n one
(Post 8333752)
£95 . . ? ;)
I think you may aswel fit it now :thumb: |
I replaced my dash with a flocked on earlier this year on my classic. Took 2 people 9hours from start to finish. Not a job i'd fancy doing again:brickwall
|
Originally Posted by wrx287
(Post 8334035)
I replaced my dash with a flocked on earlier this year on my classic. Took 2 people 9hours from start to finish. Not a job i'd fancy doing again:brickwall
|
TBH it wasnt that bad, when myself and my mate replaced my bugeye one with a flocked dash and console it was only 4 hours all in and thats was a cuppa in between. hardest part was the getting the cables out rest was ok.
http://i51.photobucket.com/albums/f3...6112008068.jpg http://i51.photobucket.com/albums/f3...02008/dash.jpg |
GC8 Flocked Dash
|
Some of you might wanna check these out... :thumb:
https://www.scoobynet.com/interior-1...i-project.html If you wanna fit a roof vent, i wrote this too :D Scoobypedia | Trusted knowledge for everything Subaru | Projects / Installing a Spec C Roof Vent Can also fit for you guys if you didnt wanna do it yourself :) |
All times are GMT +1. The time now is 07:20 AM. |
© 2024 MH Sub I, LLC dba Internet Brands