|
Stage 1 upgardes
Hi Guys,
I am considering a bit more power for my 2004 prodrive blob wagon. I reckon what I need is. uppipe, prodrive downpipe injectors(what ones) Bigger turbo(what one) sit intercooler(is this necessary) new fuel pump and a remap. is there anyone who will be able to put a package together for me for a reasonable price? |
Matty is your man in the trader section I'm sure he will have all that on his shelfs. As he breaks loads of STI's. Just get sti injectors and turbo and intercooler.
|
Thanks,
I'm in touch with him. who is mapping in scotland? I'm in Ayrshire. is Andy F still the man to go and see? what price is a map these days? |
Andy still maps ecutek £480 |
For mapping I used Russ Paton when he was at HQ garage, he’s now at RA motorsport. Great guy. Very knowledgeable and happy to explain everything |
Your list is there buddy. vf35 from an sti these come up regularly sti injectors but worth getting then cleaned and tested to be safe for only £48 sti up pipe or Harvey not the eBay 2inch crap walbro 255 or rcm 2nd decat you have I think being a ppp? 2.5 non res centre sti sports cat or decat your choice remap for 300+ |
Wrx Prodrive piped intercooler is fine for 300-320hp any more needs to be sti. I'd stick the sti scoop on as collects more air so will help too, |
Stock turbo will do maybe 280bhp.
|
Depends what power you are aiming for, and how much you've got to spend. I posted about my upgrades in another thread, so rather than typing it out again...
https://www.scoobynet.com/engine-man...l#post11995388 |
Stage 1 I'd class as an air filter, exhaust (decat), fuel pump, remap. My blob PPP wagon I had before had a Prodrive downpipe, STI up-pipe, walbro 255 pump and a panel filter. On the standard TD04 and standard injectors, TMIC - made 272bhp. Was a great daily driver. As someone else said, just depends what you're after and what you use it for.
|
Originally Posted by CHUCKblue
(Post 12033281)
Hi Guys,
I am considering a bit more power for my 2004 prodrive blob wagon. I reckon what I need is. uppipe, prodrive downpipe injectors(what ones) Bigger turbo(what one) sit intercooler(is this necessary) new fuel pump and a remap. is there anyone who will be able to put a package together for me for a reasonable price? Consider a beefier clutch and better brakes. Getting more power transferred on an old or wore clutch and going without stopping is not a good idea. |
I'd recommend the Harvey up pipe, avaliable now from AS Performance.
Better and earlier spool makes for a more driveable car |
Originally Posted by alcazar
(Post 12033556)
I'd recommend the Harvey up pipe, avaliable now from AS Performance.
Better and earlier spool makes for a more driveable car Also, Andy is still on the go. I'd go to him if he wasn't so far away! |
Thanks guys,
I've probably sourced it all. I'm needing a mapped near Glasgow now. |
Originally Posted by johnlogie
(Post 12033328)
For mapping I used Russ Paton when he was at HQ garage, he’s now at RA motorsport. Great guy. Very knowledgeable and happy to explain everything
Originally Posted by CHUCKblue
(Post 12033561)
Thanks guys,
I've probably sourced it all. I'm needing a mapped near Glasgow now. Russ mapped my 500bhp classic on vpower and vpower+meth. Car has never missed a beat |
| All times are GMT +1. The time now is 04:53 AM. |
© 2024 MH Sub I, LLC dba Internet Brands