Hi,

now we have cams that actually time up we will run the GTX 30/71 the GT30 Billet and the GT33 Billet. :thumb:

Engine will be back in and running by Tues so the testing will begin. :D

cheers
Kev

Hi Kev,

is it possible to have some pictures of the SC36 billet twin scroll version please ?

thanks a lot
Xavier

Nice one Kev, don't forget the gt35gtx aswell.

Hi,

we havent done an SC36 Billet twin scroll only the SC46 Billet twin scroll seen here........:D



Attachment 53280


Attachment 53281




Dont forget spool will be around 1000 RPM quicker on the road.

Thanks for your interest. :thumb:

cheeers
Kev

looks as though its been heavily ported?

Hi,

until we see the GTX30/71 working properly there seems little point in stocking the GTX 35 , once we have results it will show if its worth pursuing. :thumb:

As our GT35 billets have performed so well I wonder just where the Garratt version will find a home. ;)

cheers
Kev

Did someone mention the Billet GT33 :D

http://i258.photobucket.com/albums/h.../Image0245.jpg

Show off ! :D

I raise your Billet 33R with a Billet 35R with a 1.06 ;)

Attachment 53169

Now where have I seen that housing before. :wonder:


http://i694.photobucket.com/albums/v...veshousing.jpg

:D:D:D

cheers
Kev

;)

have you got SC 46 Billet compressor map ?

Hi,

compressor maps are expensive to create, or at least that is what I am told. :confused:

There are plenty of results showing the turbo's capability. which should aid your decision to whether or not the SC46 Billet is for you. :thumb:

Any more info please ask. :D

Thank you for your enquiry.

Cheers
Kev

Very good reading fella. Keep up the good work, will be very interested to see how the GTX Range goes.

Due to the popularty of our SC36 Billets we ran out of stock! :eek:

To top it off bad weather in the states delayed our replacement order! :mad:


Not wanting to get caught out again we have stocked up and kev is currently unpacking 30 SC36 billets and along with various others!


Sorry for the customers that have had to wait an extra 5 days to get their Turbo's (shipping out tommorow chaps with a nice little surprise in each box :luxhello: I hope the UPS van arrives empty!:lol:)


Ads :thumb:

Are you also still stocked up on the SC40 Billet too? :D

You boys have gone quiet, any 33R results yet ?

I should have the 'big' billet results Saturday

I dont know, a bit of snow and they grind to a halt... A bit of snow never slowed us down did it:freak3:

Hi,

how many would sir like ? :D

cheers
Kev

Hi,

busy trying to meet customers dead lines so no testing of either the Garratt GTX or our Billet 33 for a while, sorry. :brickwall

cheers
Kev

Busy is a good thing Kev :) Speak soon

Ah, nice to know they're readily available............... :)

Am looking forward to this one!

Kev - I'll give you a bell tomorrow/mon.


Jag

Update on the big billet on my thread https://www.scoobynet.com/752989-typ...achine-35.html

Headline 727 bhp !

WOW, you are really going for it Clive. Well done fella :thumb:

Hi,

Happy with that. :thumb::thumb:

Cheers
Kev.

Kev or other SC person :)

I'm looking for a stable 500bhp for my Impreza.

Its a forged 2.1 with CDB, Supertec valves, uprated valve gear and Piper 'race' cams.

I'm thinking of a billet GT30. I dont want 550-600, but keeping it relativley 'unstressed' at 500bhp.

Do you guys also sell the rotated pipework that I'd need?

Hi Adam,

we stock rotated pipework for both T3 flange turbo's and Tial V band fitments. :thumb:

Turbo wise both our SC50 and 54 direct fit billets will do the job, we also have the GT30 Billets in stock, fitted one last week, 550 BHP no problems and not wringing its neck, on the road data log showed 1 bar at 3100 RPM and 1.8 bar at 3600 RPM, snappy to say the least. :D

Cannot put in writing what it was like on the road, suffice to say on the data log was a glitch at 5500 RPM which was also present on the speed trace, at what speed I will leave to your imagination, but it was caused by wheel spin. :eek:

cheers
Kev

can you PM me with a price for Billet GT30 and rotated pipework (Tial V Band) to fit please?

What would you recommend? 0.63 or 0.82? (on a revy built 2.1 for circuit use)

Hi,

pm'd

We find for response the .63 housing is best and as it still gives 550 BHP at the top. :thumb:

Thanks for your interest

cheers
Kev

got me a sc46 billet the other day , now to get the rest !!