rover suspension knuckle joint
09 March 2007, 05:14 PM
#1
Scooby Regular
Thread Starter
Join Date: Jan 2005
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
rover suspension knuckle joint
Hi all does anybody no how to change the suspension knuckle joint on a rover 100 wonderderd is it a simple or a big job
any help would be great cheers
any help would be great cheers
09 March 2007, 10:47 PM
#2
Scooby Newbie
Join Date: Dec 2004
Location: South Wales
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Do you mean the balljoint that comes off the hub?
If it's similar to the mini it's very easy, you'll need a balljoint splitter (i use the fork type) and a fookin big hammer
and possibly a wedge to put in place of the rebound buffer to stop the suspension collapsing
If it's similar to the mini it's very easy, you'll need a balljoint splitter (i use the fork type) and a fookin big hammer
and possibly a wedge to put in place of the rebound buffer to stop the suspension collapsing
Thread
Thread Starter
Forum
Replies
Last Post