Wirral Met College workshop sessions
#1
Wirral Met College workshop sessions
I work at the college and have been discussing the possiblity of using the colleges vehicle workshops for car club members to work on their own vehicles.
This could be done a few evenings a month (depending on interest) for a small charge (£5 per person).
This would be ideal for people wanting to do jobs that require a lift, also wheel tracking and brake testing equipment could be used. A lecturer would be there to instruct or help out.
Still just an idea at the moment but if I get enough interest it may go ahead. Post or PM me if you would like to be involved in this!
This could be done a few evenings a month (depending on interest) for a small charge (£5 per person).
This would be ideal for people wanting to do jobs that require a lift, also wheel tracking and brake testing equipment could be used. A lecturer would be there to instruct or help out.
Still just an idea at the moment but if I get enough interest it may go ahead. Post or PM me if you would like to be involved in this!
#2
Scooby Regular
Tom, could the offer be opened up beyond Scoobynet?? The company I work for are nearby to the college and we've got some close contacts with the college for various reasons, I'm sure there would be plenty of interest. Let me know
#4
Yeah Jo it probably would be ok. Pm me with info and numbers and ill ask tommorow.
Sent you a PM stu. Can anyone get hold of some of the other tunnel runners and see if anyone else is interested?
Sent you a PM stu. Can anyone get hold of some of the other tunnel runners and see if anyone else is interested?
#5
Scooby Regular
Tom, we have 550 staff - I'd need to know if it was ok before I could promote it in work, not that I think they would all be interested but I can't do a quick ask around. I'll pm you the company name and my contact details
#6
Discussed it today but need to sit down on monday and get area managers approval and finalise details.
I think big jobs like clutches will take too long for the length of session I will be able to get right now at least until it gets off the ground.
In the future prehaps, all day sessions could be organised.
So anybody else interested? It would be at the 12 Quays site in birkenhead btw
I think big jobs like clutches will take too long for the length of session I will be able to get right now at least until it gets off the ground.
In the future prehaps, all day sessions could be organised.
So anybody else interested? It would be at the 12 Quays site in birkenhead btw
#7
Ok Guys, FINALLY got to speak to the boss today about the workshop sessions.
Were going to run the first session on TUESDAY the 28th (the tuesday before the run) at 6.00-8.00 in the evening. This will be an oppourtunity to get the cars on the ramps and check them over, or what ever else can be done in two hours.
This fist session will be free of charge to allow us to gauge interest and let you guys decide if it is something you would want to do regulary.
Throughout the sessions jobs we are looking to offer are:
Pre-MOT checks
Servicing
Wheel alingment
Brake maintenance and testing
Tyre fitment and wheel balancing
Component fitting eg. exhausts and suspension (the specifics of this would have to discussed prior to the session as people are worried that bolts or fittings could break that could not be replaced there and then)
If enough people come to the initial free session and decide they like it I should be able to keep the cost of the subsequent sessions to a minimum if enough people are willing to re-attend.
So get your name on the list if this is for you!
1) Bumblebee doo
2)
Were going to run the first session on TUESDAY the 28th (the tuesday before the run) at 6.00-8.00 in the evening. This will be an oppourtunity to get the cars on the ramps and check them over, or what ever else can be done in two hours.
This fist session will be free of charge to allow us to gauge interest and let you guys decide if it is something you would want to do regulary.
Throughout the sessions jobs we are looking to offer are:
Pre-MOT checks
Servicing
Wheel alingment
Brake maintenance and testing
Tyre fitment and wheel balancing
Component fitting eg. exhausts and suspension (the specifics of this would have to discussed prior to the session as people are worried that bolts or fittings could break that could not be replaced there and then)
If enough people come to the initial free session and decide they like it I should be able to keep the cost of the subsequent sessions to a minimum if enough people are willing to re-attend.
So get your name on the list if this is for you!
1) Bumblebee doo
2)
Trending Topics
#8
Scooby Regular
iTrader: (5)
Join Date: Nov 2011
Location: North wales side of Chester
Posts: 1,076
Likes: 0
Received 0 Likes
on
0 Posts
Well up for this.
Not looking to fit major parts, but would love to get it in the air and have a good look underneath, without arsing about on axle stands outside the house,
If it's definitely happening, i will be there
Not looking to fit major parts, but would love to get it in the air and have a good look underneath, without arsing about on axle stands outside the house,
If it's definitely happening, i will be there
#9
Wirral Metropolitan College - 12 Quays Campus 12 Quays Campus, Morpeth Dock,Shore Road, CH41 1AG
The workshops are around the back by the basketball court.
If you can definatly come mate put your name on the list
#10
Scooby Regular
iTrader: (5)
Join Date: Nov 2011
Location: North wales side of Chester
Posts: 1,076
Likes: 0
Received 0 Likes
on
0 Posts
[QUOTE=Tom WRX RA;10491122]Ok Guys, FINALLY got to speak to the boss today about the workshop sessions.
Were going to run the first session on TUESDAY the 28th (the tuesday before the run) at 6.00-8.00 in the evening. This will be an oppourtunity to get the cars on the ramps and check them over, or what ever else can be done in two hours.
This fist session will be free of charge to allow us to gauge interest and let you guys decide if it is something you would want to do regulary.
Throughout the sessions jobs we are looking to offer are:
Pre-MOT checks
Servicing
Wheel alingment
Brake maintenance and testing
Tyre fitment and wheel balancing
Component fitting eg. exhausts and suspension (the specifics of this would have to discussed prior to the session as people are worried that bolts or fittings could break that could not be replaced there and then)
If enough people come to the initial free session and decide they like it I should be able to keep the cost of the subsequent sessions to a minimum if enough people are willing to re-attend.
So get your name on the list if this is for you!
1) Bumblebee doo
2) Steve ex vauxhall
Were going to run the first session on TUESDAY the 28th (the tuesday before the run) at 6.00-8.00 in the evening. This will be an oppourtunity to get the cars on the ramps and check them over, or what ever else can be done in two hours.
This fist session will be free of charge to allow us to gauge interest and let you guys decide if it is something you would want to do regulary.
Throughout the sessions jobs we are looking to offer are:
Pre-MOT checks
Servicing
Wheel alingment
Brake maintenance and testing
Tyre fitment and wheel balancing
Component fitting eg. exhausts and suspension (the specifics of this would have to discussed prior to the session as people are worried that bolts or fittings could break that could not be replaced there and then)
If enough people come to the initial free session and decide they like it I should be able to keep the cost of the subsequent sessions to a minimum if enough people are willing to re-attend.
So get your name on the list if this is for you!
1) Bumblebee doo
2) Steve ex vauxhall
#15
Yeah will be a good oppourtunity to meet and greet some of the regular tunnel runners I think the cafe will be open aswell so we can get a bite to eat. BTW folks If you plan on doing some work on your car then you need to bring overalls/ steel toe cap boots
#17
Scooby Regular
iTrader: (1)
Join Date: Jan 2012
Location: Merseyside
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
Just a thought, I've got a pair of overalls spare that I can bring if anyone wants to join in, I'm not sure on a spare pair of boots but I will have a dig if you really want to get involved?
#18
#20
Thanks Lee!
Okay guys, on tuesday if I meet you in the car park (the end quarter by the basket ball courts) at 6.00 then we can all go in and get passes from reception.
We can then go to the workshop and get some of the cars in, If anyone dosent have any overalls/boots dont worry, I do have a few sets to borrow.
If anyone is unclear about where to go or anything PM me and ill try and help.
Okay guys, on tuesday if I meet you in the car park (the end quarter by the basket ball courts) at 6.00 then we can all go in and get passes from reception.
We can then go to the workshop and get some of the cars in, If anyone dosent have any overalls/boots dont worry, I do have a few sets to borrow.
If anyone is unclear about where to go or anything PM me and ill try and help.
#22
So Ill see you all tomorow
6.00
Wirral Metropolitan College - 12 Quays Campus 12 Quays Campus, Morpeth Dock,Shore Road, CH41 1AG
If you think your goin to have any problems finding it PM me and ill give you my no. Oh and we got to 'be quiet' in the car park. Another staff member complained to me once because my exhaust was 'shaking' the windows in his class
#25
Im not sure where that bike shop is mate, If its the three way lights i think you mean then its straight ahead onto shore road and then left, and then u see the college and its the second right for the big car park at the back. Im rubbish with directions, unfortunatly
#27
Scooby Regular
Thanks for setting this up tonight Tom Nice to catch up with tunnel runners too and meet new people sorry I didnt stop long, not exactly dressed for the occasion
#29
Scooby Regular
iTrader: (5)
Join Date: Nov 2011
Location: North wales side of Chester
Posts: 1,076
Likes: 0
Received 0 Likes
on
0 Posts
Well worth the trip, let's definitely get this set up and permanent, where else can you get these sort of facilities for such a low amount of cash
Me thinks nowhere.
Made up to meet proper genuine scoob enthusiasts and get some great advice, plus i now have a handbrake
#30
Thanks to everyone who turned up, everyone who said they would did so Im made up. Mark and Helen did a great job helping out too.
Alot of good ideas bein discussed and will be discussing continuing the sessions with the boss tommorow. Overall a great night
If anyone else would be interested in taking part in this then let me know!
Alot of good ideas bein discussed and will be discussing continuing the sessions with the boss tommorow. Overall a great night
If anyone else would be interested in taking part in this then let me know!