Well as no-one has started a thread

Ill start with the ones I know

in no particular order (as quite a few didnt show) feel free to add your results

1. Kev C MY94WRX (MRT grpN panel, MRT inlet plenum pipe, Jap Innovations decat downpipe, decat exhaust, HKS FCD, Blitz spec S Boost controller, Iridium plugs)
unkown

2. C Dave MY95 UK Turbo (Blitz SUS induction, full Jap Innovations decat exhaust, HKS FCD, HKS AFR, Blitz Spec S boost controller, Iridium plugs, Samco turbo hoses, uprated fuel pump, MRT billet flywheel)
unkown

3. Paul Copley S202 (MOTEC ECU, uprated fuel pump, RCM pistons and rods, induction kit, 3 bar MAP sensor)
unkown

4. Abbylad P1 (standard)
301bhp 275lb/ft

5. Marx McRae STi4 Type R(full decat exhaust, Blitz Induction, VF35 turbo)
unkown

6. PhilA RB5 (STi Intercooler, Samco hoses, HKS downpipe, WR backbox, earth mod)
unkown

7. Ninnybobs MY01WRX ( APS FMIC, TD05 FE Turbo, BRD 3” downpipe, Revolution 3” exhaust, Supersprint headers and uppipe, RCM Induction, 565cc injectors, uprated pump and FPR, Tek 3 remap, 3 boost solenoid)
unkown

8. Harvey Smith MY95 WRX Wagon (Revolution 3” exhaust, Ion Headers and uppipe, TD05/06 turbo, uprated fuel pump and reg, 550 Injectors, Harvey cold air system, Hybrid FMIC, Link ECU)
399bhp

9. Toxwaz MY00 UK Turbo (Hybrid FMIC, TD05 Turbo, EVC5 boost controller, HKS FCD, HKS AFR, magnex downpipe, HKS Hiper exhaust, Blitz LM induction, Uprated fuel pump, Iridium plugs)
unkown

10. Clare MY97 UK turbo (full decat, HKS FCD, HKS EVC5 boost controller, uprated fuel pump, TD05 turbo, Samco hoses, TSL firestorm backbox)
unkown

11. SUBTYPER STi4 TypeR (3” downpipe, 3” Scoobymania exhaust, K&N panel, uprated fuel pump and reg)
unkown

12. Chris Cheetham STi7 Type UK (full Jap Innovations decat exhaust)
unkown

13. Nick Cheetham STi8 Type UK (PPP)
unkown

14. Dave Knott MY02 WRX (MRT grpN panel, full Jap innovations decat exhaust, MRT high flow inlet pipe, MRT uprated TMIC, Blitz Spec S boost controller, HKS FCD, HKS AFR, uprated fuel pump)
unkown

15. Vulnax MY94 WRX wagon (Scooby ECU, ITG panel filter, MRT inlet plenum pipe, Scoobysport decat centre and backbox, OBX headers and uppipe, Uprated fuel pump and reg)
256bhp 259lb/ft

16. Andrew C MY98 UK Turbo wagon (Hybrid Monster FMIC, TD05Fe turbo with ported exhaust housing, Gruppe S headers, H&S 2.25” uppipe, H&S downpipe, Fujitsubo Leaglis R exhaust, Custom inlet pipe with K&N cone, Uprated pump and FPR, Link ECU, 550 injectors, Earthing mod, catch tank)
unkown

17. Nick Adams MY01 WRX (Green air filter, STi7 intercooler, full Scoobysport decat inc uppipe,)
Didnt Run

18. New Boy MY96 UK wagon (standard)
unkown

19. Peccy STi6 Type R Ltd (full decat, 2.5 litre block, Tek3)
Didnt Run

20. AndyH MY01 WRX (full decat, airfilter, Tek3 remap)
unkown

21. Stevebt MY99 UK Turbo (Apexi power FC, Apexi boost controller, Stainless headers and uppipe, T75 Downpipe, T75 centre, Blitz backbox, custom TMIC, K&N Induction, Uprated pump and reg, TD05/06 turbo)
270bhp 240lb/ft

22. John Bowes MY00 UK Turbo (MRT groupN panel, full decat, Blitz spec S boost controller, HKS FCD, HKS AFR, Samco turbo hoses, uprated fuel pump, Iridium plugs)
unkown

23. Julian MY93WRX (decat centre, drilled airbox)
CHICKEN

24. Nescoob1 MY98 V4 Type R (groupN downpipe, decat centre, Thunderstorm backbox, K&N panel)
unkown

25. Flat Faw MY00 UK Turbo (Jap innovations decat centre and downpipe, Scoobysport backbox, AE800 ECU, K&N panel)
unkown


Reserves

1. wrrjones MY02WRX (2.5 litre, Garrett turbo, Motec, Water inj, 800cc inj,Trust FMIC, 3” decat exhaust)
[b]421bhp 354lb/ft - centre diff shot, only 20% power at rear wheels

2. Tony Burns MY03 STi Spec C (standard)
Didnt Run

3. Furby STi MY03 STi Type UK (standard)
unkown

4. SteSTI MY03 STi8 (PPP, TSL333 conversion)
unkown

Extras
1. Burr - MY00 UK Wagon, PPP, Turbo
283bhp 252lb/ft

2. *Sonic* - MY00 UK, PPP, Full Decat, (ported headers & broken up-pipe)
255bhp 242lb/ft

3. P555GAZ
228bhp 215lb/ft

Steve

 

I got 301bhp 275lb/ft

 

think i got 270bhp and 240lbs of torque well it wasnt much better

 

Whats up with the car steve, doesnt sound right, its less than i used to get in my PPP Classic

 

think i was second to last with 228bhp and 218lbft

 

I got 330 BHP & 309 LBft so well chuffed (Even though I already knew that those on s/net who had belittled the TSL333 previously were wrong!)

Echo thanks to Rich & the Well Lane lads who remembered my Cossie from about 5 years ago & 'Use it as an example'

 

well done good to see a TSL333 STi8 on the rollers

 

What was this chaps figures ? 13. Nick Cheetham STi8 Type UK (PPP)

 

How come the 2.5litre only got 421bhp/354lbs - were the rollers down on the day?

Ok just read the other thread.........

 

AndrewC - 343bhp, 312lb/ft @ 1.25bar.

 

Very nice car, as well as PPP it had full decat & made 310 not sure about the torque figure though.

 

standard? who are you trying kid?

 

i struggled that day..leaking up pipe(cheers rich for pointing that out !) and in desperate need of a mapping/injectors.
but i managed 276 and 255.

thanks again to all involved.

ads

and ta to andrew c for letting me pick his brains!

 

have a dig why don't you!



23. Julian MY93WRX (decat centre, drilled airbox)
CHICKEN

 

unkown didnt they turn up then

 

Most did turn up, just haven't got figures to hand until Rich posts them here!

Ok, here they are!
http://bbs.scoobynet.co.uk/showthread.php?t=341947