Notices
Northern (England) Northern Meetings & Events

TTS Rolling Road day - Running Order

Thread Tools
 
Search this Thread
 
Old 06 September 2003, 08:40 PM
  #1  
Ninnybobs
Scooby Regular
Thread Starter
 
Ninnybobs's Avatar
 
Join Date: Dec 2001
Location: Middlesbrough
Posts: 3,525
Likes: 0
Received 0 Likes on 0 Posts
Post

Hi All, Listen very carefully, I will say this only vonce!

Well lane have requested that the first of the 'runners' arrive at the place for 9:15am. That means that if you wish to join the convoy from Scotch Corner you need to be there before 8:00am. We shall be leaving at 8:00am. (Not 5 past)!!!!!

Here is the provisional 'running' order:-

1. Martin Metcalfe (MY01 WRX) Magnex Decat Exhaust, Up-pipe,
JR Filter, Super Sprint Headers, Tek3.

2. Simon Davidson (MY99 Wagon) Magnex back box,Magnex decat
centre {straight through},K & N panel filter,Prodrive ECU
Samco turbo hoses

3. Jonny Gav (MY95 WRX) To be advised

4. Glenn Campbell (UK22B)Revolution 3" full system & downpipe
K+N panel filter

5. Leigh (98 UK Turbo) scoobysport de-cat dp, magnex de-cat
centre and backbox, k+n induction kit, and a bailey dumpvalve

6. Eric Grey (MY99 Turbo)hayward & scott de-cat dp &centre,
ITG panel filter

7. Malcolm Short (STI5)ITG Panel Filter, 3" Decat Down Pipe,
3" Exhaust/4" Tail Pipe(No Centre Box),NGK PFR7B Plugs

8. Paul Firth (STI8) PPP

9. Dave McGuckinStandard (MY95 Sti2 Type RA)Revolution Exhaust
(incl DP), Boost Controller

10. Bryan Holmes (MY98 Turbo)Blitz NurSpec Backbox,H&S Full Decat
K&N 57i Induction Kit, Forge V4 Recirc Dump Valve, PPP ECU
Intercooler Pipe, Samco Turbo Hoses kit

11. Mike Baty (UK MY97)Apexi Induction,H&S decat downpipe
Blitz Nur Spec ‘R’,Dawes device

12. Martin Abernethy (MY99 UK Turbo) STi5 intercooler
samco hoses, TEK 3, full afterburner exhaust,uprated plugs
and leads, GGR induction kit with DIY cold air feed

13. Mark Fisher (MY93 WRX), full Scoobysport decat exhaust,
Scoobyecu, K&N panel filter

14. Gussy (MY02 WRX) full haward&scott de-cat including uppipe
downpipe, superchip, bleedvalve

15. Simon Tandy (EVO IV)

16. Harvey Smith (STI6 Wagon) To be advised

17. Scott Hodgson (MY93 WRX)scoobyworld ninja back box,
bliz type cone filter

18. Steve Carr (MY97 Turbo)Blitz SUS induction kit,Revolution
exhaust system (Turbo back),Dawes Device, Lightened and
balanced fly wheel

19. Yuk Shek (MY00 Turbo) Scorpion Backbox, Magnex de-cat,
KnN 57i Induction kit and Forge Dump Valve

20. Micky Owens (MY97 WRX) K&N panel filter and NGK triple laser
spark plugs, Revolution center decat stainless system with
polished oval tailpipe, IHI Roller bearing turbo, TAS piston
recirc dump valve

21. Steve Beatty (MY99 UK Turbo) tek3 with 3 port boost solenoid
groupe s headers and up pipe, T75 down pipe,T75 resonated
centre, Prodrive back box, K&N induction kit, Blitz dump
valve, Samco hoses, NGK Platinum spark plugs

22. Edward Ramsbottom (MY02 WRX)PE full exhaust (decat up pipe,
decat downpipe, sports catalyst and PE back box) and a power
engineering remap

23. Vacant
24. Vacant
25. Vacant

As you can see, there are 3 vacant places due to people not confirming their attendance. These will be offered on a 'first come first served basis'.

If there are any problems with the running order, please email me as soon as possible.

Cheers

Martin




Old 06 September 2003, 09:14 PM
  #2  
alanbell
Scooby Regular
iTrader: (6)
 
alanbell's Avatar
 
Join Date: Feb 2003
Location: Yorkshire.
Posts: 6,824
Received 3 Likes on 3 Posts
Post

23 alan bell ????? is that OK ?? if I can find the place,
Old 06 September 2003, 09:22 PM
  #3  
Ninnybobs
Scooby Regular
Thread Starter
 
Ninnybobs's Avatar
 
Join Date: Dec 2001
Location: Middlesbrough
Posts: 3,525
Likes: 0
Received 0 Likes on 0 Posts
Post

Alan

YHM

Martin
Old 07 September 2003, 02:14 AM
  #4  
StickyMicky
Scooby Regular
 
StickyMicky's Avatar
 
Join Date: Feb 2003
Location: Zed Ess Won Hay Tee
Posts: 21,611
Likes: 0
Received 0 Likes on 0 Posts
Post

im happy
Old 08 September 2003, 05:33 PM
  #5  
SCD Simon
Scooby Regular
iTrader: (1)
 
SCD Simon's Avatar
 
Join Date: May 2001
Location: MY99 PPP Wagon
Posts: 2,099
Likes: 0
Received 47 Likes on 13 Posts
Smile

Martin

YHM re place no 24

Cheers Simon
Old 08 September 2003, 07:41 PM
  #6  
Abbylad
Scooby Regular
iTrader: (4)
 
Abbylad's Avatar
 
Join Date: Nov 2002
Location: Here and there
Posts: 1,919
Likes: 0
Received 0 Likes on 0 Posts
Post

Everyone, i`m after a drivers side fog light for an MY99-00, if anyone has one to sell bring it to well lane and i`ll have it off you

Cheers

Ab
Old 08 September 2003, 08:17 PM
  #7  
Ninnybobs
Scooby Regular
Thread Starter
 
Ninnybobs's Avatar
 
Join Date: Dec 2001
Location: Middlesbrough
Posts: 3,525
Likes: 0
Received 0 Likes on 0 Posts
Post

Simon

YHM back

Martin

Trending Topics

Old 08 September 2003, 08:27 PM
  #8  
Ninnybobs
Scooby Regular
Thread Starter
 
Ninnybobs's Avatar
 
Join Date: Dec 2001
Location: Middlesbrough
Posts: 3,525
Likes: 0
Received 0 Likes on 0 Posts
Post

Here is an updated running order:-

1. Martin Metcalfe (MY01 WRX) Magnex Decat Exhaust, Up-pipe,
JR Filter, Super Sprint Headers, Tek3.

2. Simon Davidson (MY99 Wagon) Magnex back box,Magnex decat
centre {straight through},K & N panel filter,Prodrive ECU
Samco turbo hoses

3. Jonny Gav (To be advised)

4. Glenn Campbell (UK22B)Revolution 3" full system & downpipe
K+N panel filter

5. Leigh (98 UK Turbo) scoobysport de-cat dp, magnex de-cat
centre and backbox, k+n induction kit, and a bailey dumpvalve

6. Eric Grey (MY99 Turbo)hayward & scott de-cat dp ¢re,
ITG panel filter

7. Malcolm Short (STI5)ITG Panel Filter, 3" Decat Down Pipe,
3" Exhaust/4" Tail Pipe(No Centre Box),NGK PFR7B Plugs

8. Paul Firth (STI8) PPP

9. Dave McGuckin (MY95 Sti2 Type RA)Revolution Exhaust
(incl DP), Boost Controller

10. Bryan Holmes (MY98 Turbo)Blitz NurSpec Backbox,H&S Full Decat
K&N 57i Induction Kit, Forge V4 Recirc Dump Valve, PPP ECU
Intercooler Pipe, Samco Turbo Hoses kit

11. Mike Baty (UK MY97)Apexi Induction,H&S decat downpipe
Blitz Nur Spec ‘R’,Dawes device

12. Martin Abernethy (MY99 UK Turbo) STi5 intercooler
samco hoses, TEK 3, full afterburner exhaust,uprated plugs
and leads, GGR induction kit with DIY cold air feed

13. Mark Fisher (MY93 WRX), full Scoobysport decat exhaust,
Scoobyecu, K&N panel filter

14. Gussy (MY02 WRX) full haward&scott de-cat including uppipe
downpipe, superchip, bleedvalve

15. Simon Tandy (EVO IV)

16. Harvey Smith (STI6 Wagon) To be advised

17. Scott Hodgson (MY93 WRX)scoobyworld ninja back box,
bliz type cone filter

18. Steve Carr (MY97 Turbo)Blitz SUS induction kit,Revolution
exhaust system (Turbo back),Dawes Device, Lightened and
balanced fly wheel

19. Yuk Shek (MY00 Turbo) Scorpion Backbox, Magnex de-cat,
KnN 57i Induction kit and Forge Dump Valve

20. Micky Owens (MY97 WRX) K&N panel filter and NGK triple laser
spark plugs, Revolution center decat stainless system with
polished oval tailpipe, IHI Roller bearing turbo, TAS piston
recirc dump valve

21. Steve Beatty (MY99 UK Turbo) tek3 with 3 port boost solenoid
groupe s headers and up pipe, T75 down pipe,T75 resonated
centre, Prodrive back box, K&N induction kit, Blitz dump
valve, Samco hoses, NGK Platinum spark plugs

22. Sean Dockery (MY95 WRX) To be advised

23. Edward Ramsbottom (MY02 WRX)PE full exhaust (decat up pipe,
decat downpipe, sports catalyst and PE back box) and a power
engineering remap

24. Alan Bell To be advised

25. Richard Wild (MY97 UK Turbo) Blitz SUS induction,MRT silicone inlet pipe,TD05 FE turbo, HKS EVC4 Boost controller running 1.4 bar,HKS FCD, MRT uprated top mount intercooler,full Jap Innovations decat exhaust (turbo back, Uprated fuel pump
MRT lightened pulleys, DIY earthing kit,HKS Iridium plugs
Samco hoses (turbo and coolant), Oil breathers re-routed

All places now filled

Special competition on the day. - Guess the TOTAL BHP on the day
2 quid per person, winner get his roller session paid for. Rest goes to charity.

Seeya Sunday
Old 08 September 2003, 09:29 PM
  #9  
stevebt
Scooby Regular
iTrader: (8)
 
stevebt's Avatar
 
Join Date: Sep 2002
Posts: 16,732
Received 33 Likes on 19 Posts
Post

if i dont follow the group some directions would be nice
Old 08 September 2003, 09:36 PM
  #10  
alanbell
Scooby Regular
iTrader: (6)
 
alanbell's Avatar
 
Join Date: Feb 2003
Location: Yorkshire.
Posts: 6,824
Received 3 Likes on 3 Posts
Post

martin you have mail hopefully alan
Old 08 September 2003, 10:37 PM
  #11  
Scooby Wagon
Scooby Regular
 
Scooby Wagon's Avatar
 
Join Date: Mar 2001
Posts: 777
Likes: 0
Received 0 Likes on 0 Posts
Post

Have a good one guys, was hoping to spectate but can't make it

Cheers
Paul
Old 09 September 2003, 10:30 AM
  #12  
new boy
Scooby Regular
 
new boy's Avatar
 
Join Date: Aug 2003
Posts: 2,589
Likes: 0
Received 0 Likes on 0 Posts
Talking

martin...

i live in hull..for my sins...

could i pop accross for the day and chat to get some advie on tuning options on my my96 wagon?

only had it a few weeks..(its got k&n and decat exhaust i think)


adam
Old 09 September 2003, 06:11 PM
  #13  
Ninnybobs
Scooby Regular
Thread Starter
 
Ninnybobs's Avatar
 
Join Date: Dec 2001
Location: Middlesbrough
Posts: 3,525
Likes: 0
Received 0 Likes on 0 Posts
Post

New Boy,

You would be more than welcome

Hope to see you Sunday

Martin
Old 09 September 2003, 07:58 PM
  #14  
Ninnybobs
Scooby Regular
Thread Starter
 
Ninnybobs's Avatar
 
Join Date: Dec 2001
Location: Middlesbrough
Posts: 3,525
Likes: 0
Received 0 Likes on 0 Posts
Post

Steve
I took these directions from Multimap. Hope they help.
It starts from the M1/M62 junction

Exit to the left onto M1/J42/M62 J29 for 1.3 miles
Continue straight ahead onto M62 for 2 miles
Bear left onto TINGLEY COMMON A653 for 2.1 miles
Turn right onto GRANGE ROAD for 0.4 miles
Turn right onto CHALLENGE WAY for 0.2 miles
Continue straight ahead onto GRANGE ROAD for 0.4 miles
Leave the roundabout onto ROUSE MILL LANE for 0.2 miles
Turn right onto A652 BRADFORD ROAD for 0.3 miles
Turn left onto WELL LANE

I get lost every time I go, so I am not the best person to ask

Seeya Sunday

Martin
Old 09 September 2003, 08:52 PM
  #15  
alanbell
Scooby Regular
iTrader: (6)
 
alanbell's Avatar
 
Join Date: Feb 2003
Location: Yorkshire.
Posts: 6,824
Received 3 Likes on 3 Posts
Post

Martin , did you get my mail ?? with my mods , cheers alan.
Old 09 September 2003, 09:12 PM
  #16  
BAH
Scooby Regular
 
BAH's Avatar
 
Join Date: Mar 2003
Location: Tyne Tees Scoobies
Posts: 2,689
Likes: 0
Received 0 Likes on 0 Posts
Post

is it not quicker to go through wetherby and leeds...?
Old 09 September 2003, 11:29 PM
  #17  
STi Paul
Scooby Regular
 
STi Paul's Avatar
 
Join Date: May 2003
Posts: 1,645
Likes: 0
Received 0 Likes on 0 Posts
Cool

Not since the M1 link was opened
Old 10 September 2003, 12:15 AM
  #18  
MadGrip
Scooby Regular
 
MadGrip's Avatar
 
Join Date: Jul 2003
Location: Leeds
Posts: 3,175
Likes: 0
Received 0 Likes on 0 Posts
Post

hopefully gonna turn up to specate , got a busy weekend but want to be there
Old 11 September 2003, 08:04 AM
  #19  
StickyMicky
Scooby Regular
 
StickyMicky's Avatar
 
Join Date: Feb 2003
Location: Zed Ess Won Hay Tee
Posts: 21,611
Likes: 0
Received 0 Likes on 0 Posts
Post

i think im gonna get close to 300 bhp
Old 11 September 2003, 08:51 PM
  #20  
Ninnybobs
Scooby Regular
Thread Starter
 
Ninnybobs's Avatar
 
Join Date: Dec 2001
Location: Middlesbrough
Posts: 3,525
Likes: 0
Received 0 Likes on 0 Posts
Post

Hi Guys,

Don't forget about our competition for guessing the TOTAL BHP out of all the cars on the day. Cost 2 quid each

So start studying the specs and get your calculator out. The closest to the figure will get the RR session paid for.

Don't forget, if your joining the convoy we need you at Scotch Corner for 8:00am

Here is an updated running order:-

1. Martin Metcalfe (MY01 WRX) Magnex Decat Exhaust, Up-pipe,
JR Panel Filter, Uprated Fuel Pump, Super Sprint Headers,3 Port Boost Solenoid,Tek3.

2. Simon Davidson (MY99 Wagon) Magnex back box,Magnex decat
centre {straight through},K & N panel filter,Prodrive ECU
Samco turbo hoses

3. Paul Henderson (MY94 Turbo)To be advised

4. Glenn Campbell (UK22B)Revolution 3" full system & downpipe
K+N panel filter

5. Leigh (98 UK Turbo) scoobysport de-cat dp, magnex de-cat
centre and backbox, k+n induction kit, and a bailey dumpvalve

6. Eric Grey (MY99 Turbo)hayward & scott de-cat dp ¢re,
ITG panel filter

7. Malcolm Short (STI5)ITG Panel Filter, 3" Decat Down Pipe,
3" Exhaust/4" Tail Pipe(No Centre Box),NGK PFR7B Plugs

8. Paul Firth (STI8) Prodrive Performance Pack

9. Dave McGuckin (MY95 Sti2 Type RA)Revolution Exhaust
(incl DP), Boost Controller

10. Bryan Holmes (MY98 Turbo)Blitz NurSpec Backbox,H&S Full Decat
K&N 57i Induction Kit, Forge V4 Recirc Dump Valve, PPP ECU
Intercooler Pipe, Samco Turbo Hoses kit

11. Mike Baty (UK MY97)Apexi Induction,H&S decat downpipe
Blitz Nur Spec ‘R’,Dawes device

12. Martin Abernethy (MY99 UK Turbo) STi5 intercooler
samco hoses, TEK 3, full afterburner exhaust,uprated plugs
and leads, GGR induction kit with DIY cold air feed

13. Mark Fisher (MY93 WRX), full Scoobysport decat exhaust,
Scoobyecu, K&N panel filter

14. Gussy (MY02 WRX) full haward & scott de-cat including uppipe
downpipe, superchip, bleedvalve

15. Simon Tandy (EVO IV)

16. Harvey Smith (STI6 Wagon) To be advised

17. Scott Hodgson (MY93 WRX)scoobyworld ninja back box,
bliz type cone filter

18. Steve Carr (MY97 Turbo)Blitz SUS induction kit,Revolution
exhaust system (Turbo back),Dawes Device, Lightened and
balanced fly wheel

19. Yuk Shek (MY00 Turbo) Scorpion Backbox, Magnex de-cat,
KnN 57i Induction kit and Forge Dump Valve

20. Micky Owens (MY97 WRX) K&N panel filter and NGK triple laser
spark plugs, Revolution center decat stainless system with
polished oval tailpipe, IHI Roller bearing turbo, TAS piston
recirc dump valve

21. Steve Beatty (MY99 UK Turbo) tek3 with 3 port boost solenoid
groupe s headers and up pipe, T75 down pipe,T75 resonated
centre, Prodrive back box, K&N induction kit, Blitz dump
valve, Samco hoses, NGK Platinum spark plugs

22. Sean Dockery (MY95 WRX) To be advised

23. Edward Ramsbottom (MY02 WRX)PE full exhaust (decat up pipe,
decat downpipe, sports catalyst and PE back box) and a power
engineering remap

24. Alan Bell (MY96 Turbo) Gruppe-s Headers, Flewxi Up-pipe, TSL Down pipe, Full Jasma -Jap Racing De-Cat Exhaust, BMC-Cold Air Fed Cone Filter Induction, Samco Hoses, Intercooler Water Spray,
Earthing Mod, Uprated Fuel Pump and Reg, Scooby ECU, STI6-TMIC Uprated Plugs, TDO5 Turbo, Forge Dump Valve,


25. Richard Wild (MY97 UK Turbo) Blitz SUS induction,MRT silicone inlet pipe,TD05 FE turbo, HKS EVC4 Boost controller running 1.4 bar,HKS FCD, MRT uprated top mount intercooler,full Jap Innovations decat exhaust (turbo back, Uprated fuel pump
MRT lightened pulleys, DIY earthing kit,HKS Iridium plugs
Samco hoses (turbo and coolant), Oil breathers re-routed

See you all onn Sunday

Martin
Old 11 September 2003, 08:57 PM
  #21  
BAH
Scooby Regular
 
BAH's Avatar
 
Join Date: Mar 2003
Location: Tyne Tees Scoobies
Posts: 2,689
Likes: 0
Received 0 Likes on 0 Posts
Post

i guess Jonny Gav's cars not ready then
Old 11 September 2003, 09:29 PM
  #22  
new boy
Scooby Regular
 
new boy's Avatar
 
Join Date: Aug 2003
Posts: 2,589
Likes: 0
Received 0 Likes on 0 Posts
Talking

martin..yhm,
Old 12 September 2003, 06:25 PM
  #23  
super_si
Scooby Regular
 
super_si's Avatar
 
Join Date: Feb 2002
Location: Lurkin Somewhere
Posts: 7,951
Likes: 0
Received 0 Likes on 0 Posts
Post

Anyone got Directions from York

Si
Old 12 September 2003, 08:18 PM
  #24  
Ninnybobs
Scooby Regular
Thread Starter
 
Ninnybobs's Avatar
 
Join Date: Dec 2001
Location: Middlesbrough
Posts: 3,525
Likes: 0
Received 0 Likes on 0 Posts
Post

Si,

I would have thought it would have been A64 - A1 - M1
then follow directions on previous page

Cheers

Martin
Old 12 September 2003, 08:32 PM
  #25  
super_si
Scooby Regular
 
super_si's Avatar
 
Join Date: Feb 2002
Location: Lurkin Somewhere
Posts: 7,951
Likes: 0
Received 0 Likes on 0 Posts
Post

Chatting to a lad lastnight he mentioned M62
Si
Old 12 September 2003, 09:22 PM
  #26  
Ninnybobs
Scooby Regular
Thread Starter
 
Ninnybobs's Avatar
 
Join Date: Dec 2001
Location: Middlesbrough
Posts: 3,525
Likes: 0
Received 0 Likes on 0 Posts
Post

Si,

If you follow the instructions on the previous page, it will take you on the M62 for approximately 2 miles before you turn off to Bately.

Hope to see you there (if neither of us get lost)

Martin
Old 12 September 2003, 10:17 PM
  #27  
MadGrip
Scooby Regular
 
MadGrip's Avatar
 
Join Date: Jul 2003
Location: Leeds
Posts: 3,175
Likes: 0
Received 0 Likes on 0 Posts
Post

what time you thinking of going si ?? I can meet you and show you where it is.. I'm gonna go for an hour or 2 spectating
Old 12 September 2003, 10:54 PM
  #28  
BAH
Scooby Regular
 
BAH's Avatar
 
Join Date: Mar 2003
Location: Tyne Tees Scoobies
Posts: 2,689
Likes: 0
Received 0 Likes on 0 Posts
Post

Slightly off topic, if anyone is interested in bits and bobs i have for sale, let me know and bring them along

Lexus Style Lights, Blitz Nur Spec back box, UK Turbo Interior(cant bring this)
Old 12 September 2003, 11:08 PM
  #29  
new boy
Scooby Regular
 
new boy's Avatar
 
Join Date: Aug 2003
Posts: 2,589
Likes: 0
Received 0 Likes on 0 Posts
Thumbs up

impromptu bring and buy sale....sounds good.
ads
Old 13 September 2003, 12:39 AM
  #30  
alanbell
Scooby Regular
iTrader: (6)
 
alanbell's Avatar
 
Join Date: Feb 2003
Location: Yorkshire.
Posts: 6,824
Received 3 Likes on 3 Posts
Post

Id best go in my biggest van ???? lol alan.


Quick Reply: TTS Rolling Road day - Running Order



All times are GMT +1. The time now is 08:15 PM.