jase555

Can anyone help, just built a DIY PC, it is playing up on the following. It will not recognise HDD after I have shut it down and do an immediate switch on (ie switch off then hit the power button).

If i pull the power cable out , put in it work fine every time.

I have changed the IDE primary and secondary on the mobo and changed the HDD from master to cable select.

It still does it.

Is it the HDD or mobo

help appreciated

Jase

gregh

any other boards in there? Try removing all other boards and see if that works.

greg

BobaFett

What's the board and disk?

jase555

nothing on the mobo ie cards,

all in one board an abit sl6, celeron 800 board sound and video

ibm 6.5gb hdd

jase

jase555

could it be the PSU in the case ?


jase

orbv

When you power the machine back on do you here the disk spin up?

jase555

checked the system again, the drive does not get detected in bios but i can feel it starting up when the power is hit, but nothing detected

jase

gregh

maybe this site and/or it's links may help?

http://www.viahardware.com/faq/kg7kr7/kg7kr7faq.htm

orbv

Check the jumpers on the drive has been set correctly for a master drive etc.

How makes the drive? (please do not say IBM)