Buying & laying decking !
#1
Buying & laying decking !
Can you buy a kit with full instructions from anywhere ?
Or do I have to design the layout myself & work out what materials I need ?
Was just hoping for something fairly simple for a table & chairs but that will look nice !
Cheers
Paulk
Or do I have to design the layout myself & work out what materials I need ?
Was just hoping for something fairly simple for a table & chairs but that will look nice !
Cheers
Paulk
#2
Scooby Regular
I nicked a couple of pallets and laid the decking on them after treating them, looks fantastic, piece of **** to lay and is moveable (has to be as its over drain covers)
#3
You want decking? that can be arranged!
Built a 6x8 deck base with help a few weeks back. In short:
- Clear land. (including 4 trees )
- Sink corner holes about 12"-18".
- Build basic frame with uprights concreted in and outside frame.
- Add cross members to distribute weight.
I left it at this point as I was sitting a shed on top of it so no need for the full deck, it would simply be a case of laying deck over the top though.
I would suggest planning and re-planning. Homebase sell decking in bits so its a pick and mix and build to your own specifications.
Hope this helps!
p.s. Drop POC a PM, he's doing this sort of thing all the time now!
Built a 6x8 deck base with help a few weeks back. In short:
- Clear land. (including 4 trees )
- Sink corner holes about 12"-18".
- Build basic frame with uprights concreted in and outside frame.
- Add cross members to distribute weight.
I left it at this point as I was sitting a shed on top of it so no need for the full deck, it would simply be a case of laying deck over the top though.
I would suggest planning and re-planning. Homebase sell decking in bits so its a pick and mix and build to your own specifications.
Hope this helps!
p.s. Drop POC a PM, he's doing this sort of thing all the time now!
#4
Scooby Regular
Join Date: Oct 2000
Location: Surrey, UK
Posts: 8,384
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by SJ_Skyline
p.s. Drop POC a PM, he's doing this sort of thing all the time now!
Fulham,
Check out your local timber merchants - better selection than B&Q usually, there are various sizes of pre-cut kits available, but depends on what your local place stocks - theres is one just outside of Redhill on the A23 to Crawley that stocks some of this stuff.
Was tempted myself, but its not a cheap undertaking.
Good luck,
Alex
#5
Scooby Regular
iTrader: (1)
Join Date: Jul 2004
Location: There on the stair
Posts: 10,208
Likes: 0
Received 0 Likes
on
0 Posts
This place is great - this is the link to the decking forum: http://forum.doityourself.com/forumdisplay.php?f=16
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
bluebullet29
General Technical
9
05 October 2015 02:17 PM