lrc-100 owners please help!!
#1
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Jan 2002
Location: John O'Groats!
Posts: 862
Likes: 0
Received 0 Likes
on
0 Posts
lrc-100 owners please help!!
Wondered if anybody could do me a small favour and take a couple of resistances from an lrc100 (the jammer part, 4 pins) if the block is at the bottom and pin 1 is bottom left, top left 2, 3 top right, 4 bottom right and 5 is the metal circle edge that goes around all the pins making up the plug. Could you measure the resistance between 2+3, 3+4, 3+5, 4+5. Doesn't have to be too accurate only high or low resistance i think although if you get values all the better.
p.s. if you put a bit of insulation/ tape etc its a lot easier to get the readings. Cheers scott.
BAH has already done this but i need one more (preferabley one you know is working) to rule everything else out. Thanks again.
p.s. if you put a bit of insulation/ tape etc its a lot easier to get the readings. Cheers scott.
BAH has already done this but i need one more (preferabley one you know is working) to rule everything else out. Thanks again.
Thread
Thread Starter
Forum
Replies
Last Post
Brzoza
Engine Management and ECU Remapping
1
02 October 2015 05:26 PM