Blaster_1

iTrader: (1)

Hi all need some help im after a set of ROTA's either grid drift 18x9.5 or G-force 18x9 I have a 2005 sti with 114.3 pdc with the wider track will the wheels fit under my arches or will they stick out if so what could I do to make them fit (roll or flair the arch) thanks ken

mantazini

iTrader: (25)

Maggs is the man for the wheels.......

M444GY

iTrader: (72)

the grids will go on but you will ned to run stretched tyres and ideally roll the arches to get them under . coilovers is again another ideall mod so that you get the heights and looks right .

the forces you would also neet to run a stretch on the tyres and get the arches done .

they will fit on standard suspension but it will look odd


mags

Blaster_1

iTrader: (1)

Where is the best place around Middlesex to get the arch work done before I buy the wheels, to stop all the chafing?

Think i would go the FORCE rout as that will be a 0.5 inch saving on the arch.

M444GY

iTrader: (72)

erm i dont know of anyone locally there was a thread on here a while back . pm ricky maybe , i think he had it done somewhere round here

Mikee

Wasn't it a place in Hayes?

Budgie

iTrader: (4)

arch enemy i think

rickya

iTrader: (18)

Arch enemy are very good. The place I used are crap, called Style Dynamix in Hayes dont use them.

Guv

iTrader: (8)

Russ recomended Arch enemy, I have spoken to the guy on the phone sounds like reasonable chap, prices are fair and he also comes out to you,

http://www.archenemy.co.uk/

I will getting rears done very soon, will let you know the outcome

Blaster_1

iTrader: (1)

OK thanks for all your feed back will give Arch enemy a call. As I need the arch's done very soon so i can then get the wheels.

M444GY

iTrader: (72)

Sketch

Sorry chap only just seen this post,

Yes Archenemy is the one I used, I heard only good feed back from people when asking around when I needed mine doing so gave Phil a call he came out next day talked me through what he was going to do (not that I didn't know) before he even touched the car, comes across as being someone who knows what he's doing and talking about!

Russ!

Blaster_1

iTrader: (1)

Thanks for your advise
They sound very good just looked at there site and they do group discounts for 2 or more car's just wondered how many others would like this done ?

Guv

iTrader: (8)

how many arches do you want doing?

Blaster_1

iTrader: (1)

Will be looking to do all 4 mate rolled.
but may need them flared just checking offsets of wheels to work out how much clearance I will need

Guv

iTrader: (8)

I have contacted him and just need to confirm a date when I want to do it, Hes told £80 for two £130 for four not sure if he will discount this as it is prity reasonable.

He does ask what wheel you have and the offsets and stuff I guess toi judge how much pulling and rolling will be required.

These are the dates he's given me :

tues 30/11 PM
tues 7/12 PM
weds 8/12
thurs 9/12
fri 10/12
sat 11/12

If your up for it let me know maybe I can organise something at RTS??

Sketch

Well it's gone up a bit for 4 since I had mine done but I still think it's a bargain!
I was going to say they offer a group buy too.

I my be having to look at getting my backs flared as I've got the back just where I want it but still got the occasional rubbing if I take passengers and the odd drop down on speed bumps but I can't see how they flare without needing some paint and can't afford to get my quarter panels painted!!
All this gearbox malarkey really taking it out on my pocket!

Guv mate let me know when you get it done I'll pop down.

Scooby_CL

iTrader: (2)

with the newage arch extender things how are the rear arches rolled?

i want wide rims but do they simply roll the arch and the plastic extender flexes with the arch... i'm unsure lol, anyone rolled there 2005 onwards arches?

Sketch

TBH due to the fact that you have the lil' plastic trim bit you could prob roll and pull harder the plastic will flex and if (GOD FORBID) the paint does crack on the quarter the trim will cover it!

Ring Phil and ask he will tell you.

Russ!

Martini's

iTrader: (1)

I Also would like to jump in on this only need the 2 rear doing & can make all the dates posted just let me know place & time,I to have newage with 8.5*18 rotas & only rub when some one in the back.

Glen.

Sketch

I've just got off the phone to him and he'll do you all a special price so get all ya dates sorted let me know.

He's away from the 1st-5th of Dec so if you wanna get in quick hurry up!
As Guv has already pointed out
tues 30/11 PM
tues 7/12 PM
weds 8/12
thurs 9/12
fri 10/12
sat 11/12
Sorry didn't see it!?!

Russ!

Guv

iTrader: (8)

Short answer yes....I seen loads of cars on Nasioc will flared plastic arches, the plastice just flexes a bit, remember your not pull your arches that far out, STI arches are prity wide as they are and unless your going for something silly like 245+ then your going to have to worry about cracking, 225 on a strech should be ok.

http://www.archenemy.co.uk/?page_id=35#Subaru

Guv

iTrader: (8)

As per the conversation Russ has had with Phil at Arch Enemy(Cheers Mate), we should be able to get a discount for a group arch rolling session.

I have e-mailed him to see if he is available to do 3 cars on SATURDAY 11TH DEC at rear of Ruislip Tyre Service from about 9am

You need to PM me your E-mail address so I can send you the questionare sheet and paypal me £20 deposit (can be dropped to RTS) as Phil will charge a £40 call out if no one shows ( which I dont really want to pay).

Cut off for this is Wednesday 1st Dec, so let me know ASAP as he is going on holiday from the 15th and will not be back until the New Year

Martini's

iTrader: (1)

Guv saturday would be the 11th but I see the time you posted it was all becoming a bit blured by then,LOL

Big thanks to GUV & RUSS. For sorting this PM to follow.

M444GY

iTrader: (72)

Blaster_1

iTrader: (1)

Sorry Guv been away with work wouldn't be able to make the Th but let me know if the date changes or how it comes out Thanks

Guv

iTrader: (8)

Now worries dude, will post up the results when done