MY 2011 Saloon / Hatch, show yourselves! Pics & chat
#211
For me, the change in exhaust note from the Prodrive 330 system to the Scorpion 340 isn't as noticable inside the car as it is outside. Not as noticable as the harsher ride on the latter which affects my old bones.
#213
Thread seems to have died a death. I guess there can't be many 2011/12 Stis around. I've never seen another one on the road. In fact I can do a 200 mile round trip on a weekend and never see another Scoob.
#216
Former Sponsor
iTrader: (24)
Join Date: Jan 2009
Location: Hyde Manchester
Posts: 1,364
Likes: 0
Received 0 Likes
on
0 Posts
Hi,
Mark from HT Autos, just managed to borrow a car for a couple of weeks so we can design a new 2011/12 Subaru WRX STi diffuser. If we have time ,may also design a few other parts.
Very rough at the moment, but what do you think??
Cheers for looking,
Mark @ HTAutos
Mark from HT Autos, just managed to borrow a car for a couple of weeks so we can design a new 2011/12 Subaru WRX STi diffuser. If we have time ,may also design a few other parts.
Very rough at the moment, but what do you think??
Cheers for looking,
Mark @ HTAutos
#217
Scooby Regular
Looks very interesting Mark.
Does the centre section extend forward almost up to the sub frame now?
Does the centre section extend forward almost up to the sub frame now?
HT Auto rear diffuser fitted, added some rubber edging to it where it meets the bumper ...............
It ends about half way along the wheel well, so decided to add an extension piece to take it almost up to the subframe and mounted using some existing holes (plus a couple of self tappers) in the wheel well stiffening..........
Used part of a plastic mixing tray cut to size and then covered it in heatshield tape as its above parts of the exhaust "Y" pipe..........
It ends about half way along the wheel well, so decided to add an extension piece to take it almost up to the subframe and mounted using some existing holes (plus a couple of self tappers) in the wheel well stiffening..........
Used part of a plastic mixing tray cut to size and then covered it in heatshield tape as its above parts of the exhaust "Y" pipe..........
Last edited by Don Clark; 08 September 2012 at 05:53 PM.
#219
Scooby Regular
#223
Scooby Regular
iTrader: (4)
Join Date: Sep 1999
Location: MY99UK-MY02STi-MY99Type R-MY06 T20-MY11 340R-MY05 TYPE25
Posts: 11,468
Received 22 Likes
on
19 Posts
I've decided keep the car Black and Red theme and now sourced some Black 19"
Mark,
I'll buy the new Black diffusser will replace the front lip spoiler with a new Black one, when available I'm sure Kev1 will order one aswell
Tony
Mark,
I'll buy the new Black diffusser will replace the front lip spoiler with a new Black one, when available I'm sure Kev1 will order one aswell
Tony
#225
Looks nice but in my honest opinion it looks like there is too much space between the bottom of the exhaust tips and the diffuser.
Looking good though
#228
Former Sponsor
iTrader: (24)
Join Date: Jan 2009
Location: Hyde Manchester
Posts: 1,364
Likes: 0
Received 0 Likes
on
0 Posts
Thought you would have trouble handling the raw power of the 1.5 beast,LOL
We are taking good care with your car, dont worry that not your rear bumper. Thanks again for the borra
Cheers,
Mark @ HTAutos
#230
Interestingly, cars with a cat produce more CO2 than cars without...
#231
Scooby Regular
Join Date: Dec 2001
Location: Arborfield, Berkshire
Posts: 12,387
Likes: 0
Received 0 Likes
on
0 Posts
question on the 340 r upgrade... does it remove the catalytic converter? I was reading what the 340 r upgrade supplies on the pro-r website and it said a decat mid section is provided. If this is the case, what does this do to the MOT?
Interestingly, cars with a cat produce more CO2 than cars without...
Interestingly, cars with a cat produce more CO2 than cars without...
#232
That's what I thought, but was a little concerned when I read it. The dealer only charged me 1600 fitted for the 340 upgrade, whereas it is 1670 on the pro-r site for the kit (not fitted?). The price difference (£70 plus fitting) may cover the mid section.
#234
Scooby Regular
#237
Scooby Regular
Yep,
Although slightly different for the Gen3 cars this is the basic turboback setup.
As there is no cat in the up pipe (whereas the WRX has one) the cats become first and second
Top pipe in picture is a Gen 3 down pipe minus the 2nd CAT shielding/cover
Although slightly different for the Gen3 cars this is the basic turboback setup.
As there is no cat in the up pipe (whereas the WRX has one) the cats become first and second
Top pipe in picture is a Gen 3 down pipe minus the 2nd CAT shielding/cover
#238
thanks for the lesson...
#239
Scooby Regular
iTrader: (2)
Join Date: Apr 2003
Location: NESF - IDDYSTI
Posts: 203
Likes: 0
Received 0 Likes
on
0 Posts
Had a few bits added to my STI saloon, car is starting to take shape
Prodrive 19" wheels
Rear Spoiler
Front Splitter
Front and Rear Rally Armour Mudflaps
Porsche 365mm front brake upgrade
Milltek 3" turbo back exhaust
K & N Panel Filter
Bob Rawle Remap
Prodrive 19" wheels
Rear Spoiler
Front Splitter
Front and Rear Rally Armour Mudflaps
Porsche 365mm front brake upgrade
Milltek 3" turbo back exhaust
K & N Panel Filter
Bob Rawle Remap