Fed up!!!!! new rear spoiler and nobody to fit it..
03 March 2008, 10:06 AM
#1
Scooby Regular
Thread Starter
Join Date: Jul 2007
Posts: 765
Likes: 0
Received 0 Likes
on
0 Posts
Fed up!!!!! new rear spoiler and nobody to fit it..
I have had a rear sti8 spoiler bought for me lucky i know, and now i carnt find any one to fit it for me, am so fed up 
03 March 2008, 10:44 AM
#3
Scooby Regular
Join Date: Jan 2008
Posts: 535
Likes: 0
Received 0 Likes
on
0 Posts
if its painted.... then all u have to do is 4 screws.............. maybe some bungs as well lol
open your boot and u should see 2 holes on each side, if u got brake light on it there will be a little wire that u must disconnect first..
should take.... about 5mins.... prob better if u had some1 to help u hold the thing up whilst u doing the screws haha
open your boot and u should see 2 holes on each side, if u got brake light on it there will be a little wire that u must disconnect first..
should take.... about 5mins.... prob better if u had some1 to help u hold the thing up whilst u doing the screws haha
03 March 2008, 10:54 AM
#4
Scooby Regular
iTrader: (22)
Join Date: May 2006
Location: Doncaster, S. Yorks.
Posts: 21,415
Received 0 Likes
on
0 Posts
er.... what mew said... i think
i managed easily enough with my mrs to swap my mid-level spoiler for a sti6 job. only hassle was the mid level had screws embedded in it, whereas the sti6 needed them screwing into it, so had to pop to homebase and buy some...
all in all 30 mins excluding trip to homebase
i managed easily enough with my mrs to swap my mid-level spoiler for a sti6 job. only hassle was the mid level had screws embedded in it, whereas the sti6 needed them screwing into it, so had to pop to homebase and buy some...
all in all 30 mins excluding trip to homebase
03 March 2008, 10:56 AM
#5
Scooby Regular
Thread Starter
Join Date: Jul 2007
Posts: 765
Likes: 0
Received 0 Likes
on
0 Posts
there are 8 new holes to drill, its the one from scoobyworld, great looking spoiler thou, drill the holes and seal with sealer or something recommended bodyshop fitted!!!! owww
03 March 2008, 11:32 AM
#7
Former Sponsor
Join Date: Sep 2000
Location: www.scoobyworld.co.uk
Posts: 1,987
Likes: 0
Received 0 Likes
on
0 Posts
the spoiler comes with drill locating guides which show you exactly where the new holes need to be drilled in the bootlid (no need for a tape mesure). Most bodyshops would charge approx 1hr labour to fit, should be able to find a good one via yell.com
Hope this helps
Neil
Welcome to Scooby world
Trending Topics
03 March 2008, 11:51 AM
#8
Scooby Regular
iTrader: (22)
Join Date: May 2006
Location: Doncaster, S. Yorks.
Posts: 21,415
Received 0 Likes
on
0 Posts
hi
the spoiler comes with drill locating guides which show you exactly where the new holes need to be drilled in the bootlid (no need for a tape mesure). Most bodyshops would charge approx 1hr labour to fit, should be able to find a good one via yell.com
Hope this helps
Neil
Welcome to Scooby world
the spoiler comes with drill locating guides which show you exactly where the new holes need to be drilled in the bootlid (no need for a tape mesure). Most bodyshops would charge approx 1hr labour to fit, should be able to find a good one via yell.com
Hope this helps
Neil
Welcome to Scooby world
id rather buy from thses established gentlemenas than the polish crap off ebay
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
ATWRX
Full Cars Breaking For Spares
88
01 February 2016 07:28 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM