finally got round to fitting my gauges
24 May 2006, 08:07 PM
#1
Scooby Regular
Thread Starter
Join Date: Dec 2002
Location: devon
Posts: 2,944
Likes: 0
Received 0 Likes
on
0 Posts
finally got round to fitting my gauges
i will be replacing the pod but this was a freebie so mushn't grumble 
scuse the pics as it's a bit dark in my garage, these were the best 3 out of 103
also moved the knocklink to a more suitable place
big thanks to Nick Gilchrist for the gauges
http://domain887009.sites.fasthosts.com/shop/index.php
bargain me finks
daz
scuse the pics as it's a bit dark in my garage, these were the best 3 out of 103
also moved the knocklink to a more suitable place
big thanks to Nick Gilchrist for the gauges
http://domain887009.sites.fasthosts.com/shop/index.php
bargain me finks
daz
25 May 2006, 01:13 PM
#7
Scooby Regular
iTrader: (4)
Join Date: May 2005
Location: midlands......
Posts: 1,966
Likes: 0
Received 0 Likes
on
0 Posts
Are those the smoked version ones?........ if so thats prob the best view you will get of them,as in any daylight conditions they are a bugger to read,great at night and when cloudy,but the slightest sunlight reflects badley on them..........
Trending Topics
25 May 2006, 06:12 PM
#8
Scooby Regular
Thread Starter
Join Date: Dec 2002
Location: devon
Posts: 2,944
Likes: 0
Received 0 Likes
on
0 Posts
cheers for noticing marty lol
it's straight now
they are a bit of a b1tch to see in the daylight tbh
i want a pod that fits in the same hole but faces the driver , i've seen them somewhere but can't remember where
it's straight now
they are a bit of a b1tch to see in the daylight tbh
i want a pod that fits in the same hole but faces the driver , i've seen them somewhere but can't remember where
25 May 2006, 09:01 PM
#11
Scooby Regular
Thread Starter
Join Date: Dec 2002
Location: devon
Posts: 2,944
Likes: 0
Received 0 Likes
on
0 Posts
click the link on my first post
they come with senders , you will need a sandwich plate that fits between the oil filter and sump, which allows the oil gauge senders, 2 in my case...
you will also need a sleeve for the water gauge sender to fit , the sleeve fits in the main hose on the radiator, i have samcos and its 38mm , nick(above) supplies everything you need. also needed is a wiring harness that connects all the gauges together, makes life alot easier
if you ring him and mention scooby dazza sent you then you may get a bit of discount
fitting wise , i got quoted 100 + vat
so i challenged someone else to beat that and they did . 100 cash
and i helped which should have doubled the labour cost lol as i got him too move my boost gauge and knocklink
they come with senders , you will need a sandwich plate that fits between the oil filter and sump, which allows the oil gauge senders, 2 in my case...
you will also need a sleeve for the water gauge sender to fit , the sleeve fits in the main hose on the radiator, i have samcos and its 38mm , nick(above) supplies everything you need. also needed is a wiring harness that connects all the gauges together, makes life alot easier
if you ring him and mention scooby dazza sent you then you may get a bit of discount
fitting wise , i got quoted 100 + vat
so i challenged someone else to beat that and they did . 100 cash
and i helped which should have doubled the labour cost lol as i got him too move my boost gauge and knocklink
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
ossett2k2
Engine Management and ECU Remapping
15
23 September 2015 09:11 AM