Has anyone got any information on what the plug adaptor looks like that will convert tho loom three pin plug to alow it to fit onto the headlight height adjuster on the prodrive projectors fitted to my bug eye, and where I may buy a couple from as the person who fitted the lights missed fitting them.

Cheers

 

If your going from your original 3 pin to sti type im pretty sure you need a circuit board made up i will find out some info i have on it

 

https://www.scoobynet.com/lighting-a...converter.html There you go, you need resisters to build a circuit board.

 

Cheers John, The lights look to have three pin sockets on them the issue is that the size is different the ones on the loom are smaller so its a step up I need

 

I take it you have a wrx with a 0 to 3 switch and is it uk300 lights ?? sorry i thought you meant you had sti lights

 

Thats the ones should of explained in more detail

 

Im not sure you can buy them, id try ebay or maplins and look at there mini connectors,and just make up a small loom to connect them,id solder the terminals on then heat shrink over them. ps well nice lights btw!!

 

Cheers again john I am going to haveto make up littlr looms for all the connections as thay have been fitted a little bit on the bodge side.