GD Morette Leveling motor help
#1
Scooby Newbie
Thread Starter
Join Date: Jan 2004
Location: New York
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
GD Morette Leveling motor help
I've been trying to find some info on wiring in the leveling motors on my new age Morette's. Anything I've found on the forums in the states relate to the JDM/EDM lights which have a different harness on the motor (6 pin vs the 3 pin on the Morette's). Can anyone here give me some insight?
Thanks.
Thanks.
#2
Scooby Regular
iTrader: (11)
Pretty sure i remember reading somewhere that sti headlights are 6 wire,and i know for sure uk bugeye wrx are 3. I fitted jdm sti lights to mine and they havnt got them at all.I did see somewhere someone adapted 3 wire to 6 using a 6 pin switch and making up a circuit board.It might be on the search on here but not sure,dont know if this helps?
#5
Scooby Newbie
Thread Starter
Join Date: Jan 2004
Location: New York
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
I have Morette's on my car. The harness coming out of the leveling motors are 3 pin. My car has nothing to do with 6 pin on the headlight side of things.
At the switch I will be using one out of an '06 STi. I have the diagram for that so that's not the issue. I'm wondering what each of the 3 wires represent on the Morette motors and how to wire that to my switch.
At the switch I will be using one out of an '06 STi. I have the diagram for that so that's not the issue. I'm wondering what each of the 3 wires represent on the Morette motors and how to wire that to my switch.
#6
Scooby Regular
iTrader: (11)
http://forums.nasioc.org/forums/show...=262151&page=3 This might help It looks like you can use your 6 pin switch rather than the 4 pin uk wrx type,just multi meter it and leave 2 pins disconnected you dont need.
Last edited by bugeyejohn; 25 February 2011 at 10:29 PM. Reason: cant spill
#7
Scooby Newbie
Thread Starter
Join Date: Jan 2004
Location: New York
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
I appreciate the help. That said I thought I'd been clear but maybe pictures will help you understand.
Those instructions are for these lights; aka JDM's
http://jdmcars.info/cars/subaru/impreza/jdm-sti.jpg
I have these lights; aka Morette's
http://www.morette.com/products/HEAD...mpreza2000.jpg
The leveling motor harness are DIFFERENT on these two lights. The JDM's have a 6 pin harness and the Morette's use a 3 pin.
Those instructions are for these lights; aka JDM's
http://jdmcars.info/cars/subaru/impreza/jdm-sti.jpg
I have these lights; aka Morette's
http://www.morette.com/products/HEAD...mpreza2000.jpg
The leveling motor harness are DIFFERENT on these two lights. The JDM's have a 6 pin harness and the Morette's use a 3 pin.
Trending Topics
#8
Scooby Regular
iTrader: (11)
https://www.scoobynet.com/lighting-a...as-anyone.html This is what you need to do as the uk300 lights also use a 3 pin leveller motor ,In i ideal world use a 4 pin switch although it may be possible to use yours but i couldnt say for sure.
Last edited by bugeyejohn; 09 March 2011 at 08:00 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
shorty87
Full Cars Breaking For Spares
19
22 December 2015 11:59 AM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
M4RKG
General Technical
3
30 September 2015 07:51 PM