wiring up universal air /fuel ratio sensor
17 January 2011, 02:45 PM
#1
Scooby Regular
Thread Starter
Join Date: Sep 2007
Location: manchester
Posts: 290
Likes: 0
Received 0 Likes
on
0 Posts
wiring up universal air /fuel ratio sensor
got a m reg 94 jap import .... someone has removed and blanked off sensor in headers, customer has supplied a universal sensor it has 3 wires .... 2 white which are for heater in sensor and 1. black which is signal to ecu....
but on car the wires are yellow with red pin stripe...white , black pin stripe and white anybody any ideas which wires go where ..
the yellow has 12v +
the white has 0.1v +
the white/black has 0.2 volt
by the way the car is running rough and popping about 4000 rpm hense fitting sensor
but on car the wires are yellow with red pin stripe...white , black pin stripe and white anybody any ideas which wires go where ..
the yellow has 12v +
the white has 0.1v +
the white/black has 0.2 volt
by the way the car is running rough and popping about 4000 rpm hense fitting sensor
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
