Smurf2k

iTrader: (6)

I have an import that has been fitted with a rear fog for mot purposes.

I have just fitted some afterburner rear lights.

Is it possible to re wire the fog light to these and do away with the extra ugly light?

alcazar

iTrader: (2)

Should be. Do the new lights have foglight bulbs/fittings in? If so, just re-route the wire to the bulb and connect it's other side to earth.

If your lights are owt like the stock items, removal of the bulbholder is easy and you can SEE all the connections on the inside

What you done with your STi lights? Wanna sell?

Smurf2k

iTrader: (6)

Cheers mate will take a look tomorrow as i have to take the clocks out to check the kph to mph convertor.

Sorry already sold the sti lights to a guy in Austria. They are due for collection by courier on Monday.

alcazar

iTrader: (2)

D'ooooooooooh b*gger!

Post again if you get stuck with the new lights.

ozzreid1964

iTrader: (32)

change the bulb and wire one of the reverse lights instead

joey_turbo

iTrader: (26)

People always mention wiring in to the reverse lights.

But whats stopping you using a UK rear light loom, with the fog bulb, drilling an extra hole to take the new bulb and popping that in?

I have a spare UK loom you can have for free.

Smurf2k

iTrader: (6)

I was thinking that maybe can just use a UK rear fog light switch?
There is two unused connectors at the back of the panel just above the coin tray.

it looks like who ever imported has used a wire from one of the connectors to power the new switch they have fitted. However its just a generic switch with spade connectors on it.

Might pop down the local scrapy on Monday see if I can pick up a switch and see if it has the same conenctions.

C17RPA

thats what i done when i fitted my sti lights

Smurf2k

iTrader: (6)

But I have done the opposite, Removed the STI lights and fitted Afterburner Lights.