AIRBAG LIGHT!!!
#1
Scooby Regular
Thread Starter
Join Date: Mar 2007
Location: In a world of my own.
Posts: 574
Likes: 0
Received 0 Likes
on
0 Posts
AIRBAG LIGHT!!!!
Hey Guys
Having just removed my seatbelts to install some four point harnesses, i noticed that my airbag light has come on on the dash. When i removed the front two reatbelts, i had to unplug the little wire that was going into the reel. My question is: how can i get rid of this light without just taking the bulb out of the dash???
This particular car is a 04 JDM Spec-c
All advice is greatly appreciated.
Thanks
Rich
Having just removed my seatbelts to install some four point harnesses, i noticed that my airbag light has come on on the dash. When i removed the front two reatbelts, i had to unplug the little wire that was going into the reel. My question is: how can i get rid of this light without just taking the bulb out of the dash???
This particular car is a 04 JDM Spec-c
All advice is greatly appreciated.
Thanks
Rich
Last edited by RICH S202; 06 February 2008 at 05:24 AM. Reason: No hits
#4
Former Sponsor
iTrader: (3)
You need to fit a resistor to the plug to fool it into thinking the seatbelt is still there.
Am doing the same to mine today and have a pocket full of different sized resistors. I think 3 ohmn is the right size.
There is a std subaru part for this but you may need to be patient and order through your subaru dealer for them to get from Japan.
I wasnt patient so a trip to Maplin sorted out a load of 20p resistors....
Am doing the same to mine today and have a pocket full of different sized resistors. I think 3 ohmn is the right size.
There is a std subaru part for this but you may need to be patient and order through your subaru dealer for them to get from Japan.
I wasnt patient so a trip to Maplin sorted out a load of 20p resistors....
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Phil3822
General Technical
0
30 September 2015 06:29 PM