Data Logger wired to Apexi ECU
10 January 2008, 07:51 PM
#1
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: May 2005
Location: Back in the UK at last!!!
Posts: 2,084
Likes: 0
Received 0 Likes
on
0 Posts
Data Logger wired to Apexi ECU
I have DL90 data logger that i am fitting to my 93MY classic.
There is the option to take a high pulkse of the HT leads for a RPM logging.
However i would prefer to take a digital pulse from the ECU.
What i need is a pulse from the ECU from either a crank sensor or maybe event the RPM signal on the ECU with a mximum of 5 volts.
Can anyone advise of such a sensor, and the pinout number to wire into on the ECU loom?
cheers
There is the option to take a high pulkse of the HT leads for a RPM logging.
However i would prefer to take a digital pulse from the ECU.
What i need is a pulse from the ECU from either a crank sensor or maybe event the RPM signal on the ECU with a mximum of 5 volts.
Can anyone advise of such a sensor, and the pinout number to wire into on the ECU loom?
cheers
Thread
Thread Starter
Forum
Replies
Last Post
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM