RB5 bulbs
#1
Could anyone tell me what type of bulb I need for the driving lights on my RB5? One has just blown!
Also, how easy is it to adjust the beams? At the moment I feel they are slightly too high, and point too far out to the sides...
Thanks
Graham
Also, how easy is it to adjust the beams? At the moment I feel they are slightly too high, and point too far out to the sides...
Thanks
Graham
#3
There are to ways to adjust the beams:
One involves taking the wheels off, taking the wheel arch liner out, taking.... OK I'll stop there.
Alternatively, grab hold of the lamp and move it into the position you want. The mounts are designed to allow movement up/down and left/right.
If you find that they move out of adjustment, then try taking the lamps off (3 screws on the backing plate), and tighten the big nut on the back of the mounting plate. It's a bit of a faff, you basically need to get them tight so that they don't move on their own, but not too tight that you can't adjust them by hand.
One involves taking the wheels off, taking the wheel arch liner out, taking.... OK I'll stop there.
Alternatively, grab hold of the lamp and move it into the position you want. The mounts are designed to allow movement up/down and left/right.
If you find that they move out of adjustment, then try taking the lamps off (3 screws on the backing plate), and tighten the big nut on the back of the mounting plate. It's a bit of a faff, you basically need to get them tight so that they don't move on their own, but not too tight that you can't adjust them by hand.
Thread
Thread Starter
Forum
Replies
Last Post
jonnyboy82
Lighting and Other Electrical
0
29 September 2015 01:59 PM
TylerD529
Lighting and Other Electrical
5
20 September 2015 12:10 PM